| 1 | // SPDX-License-Identifier: GPL-2.0-only | 
|---|
| 2 | /* | 
|---|
| 3 | *	Low-Level PCI Support for PC | 
|---|
| 4 | * | 
|---|
| 5 | *	(c) 1999--2000 Martin Mares <mj@ucw.cz> | 
|---|
| 6 | */ | 
|---|
| 7 |  | 
|---|
| 8 | #include <linux/sched.h> | 
|---|
| 9 | #include <linux/pci.h> | 
|---|
| 10 | #include <linux/pci-acpi.h> | 
|---|
| 11 | #include <linux/ioport.h> | 
|---|
| 12 | #include <linux/init.h> | 
|---|
| 13 | #include <linux/dmi.h> | 
|---|
| 14 | #include <linux/slab.h> | 
|---|
| 15 |  | 
|---|
| 16 | #include <asm/acpi.h> | 
|---|
| 17 | #include <asm/segment.h> | 
|---|
| 18 | #include <asm/io.h> | 
|---|
| 19 | #include <asm/smp.h> | 
|---|
| 20 | #include <asm/pci_x86.h> | 
|---|
| 21 | #include <asm/setup.h> | 
|---|
| 22 | #include <asm/irqdomain.h> | 
|---|
| 23 |  | 
|---|
| 24 | unsigned int pci_probe = PCI_PROBE_BIOS | PCI_PROBE_CONF1 | PCI_PROBE_CONF2 | | 
|---|
| 25 | PCI_PROBE_MMCONF; | 
|---|
| 26 |  | 
|---|
| 27 | static int pci_bf_sort; | 
|---|
| 28 | int pci_routeirq; | 
|---|
| 29 | int noioapicquirk; | 
|---|
| 30 | #ifdef CONFIG_X86_REROUTE_FOR_BROKEN_BOOT_IRQS | 
|---|
| 31 | int noioapicreroute = 0; | 
|---|
| 32 | #else | 
|---|
| 33 | int noioapicreroute = 1; | 
|---|
| 34 | #endif | 
|---|
| 35 | int pcibios_last_bus = -1; | 
|---|
| 36 | unsigned long pirq_table_addr; | 
|---|
| 37 | const struct pci_raw_ops *__read_mostly raw_pci_ops; | 
|---|
| 38 | const struct pci_raw_ops *__read_mostly raw_pci_ext_ops; | 
|---|
| 39 |  | 
|---|
| 40 | int raw_pci_read(unsigned int domain, unsigned int bus, unsigned int devfn, | 
|---|
| 41 | int reg, int len, u32 *val) | 
|---|
| 42 | { | 
|---|
| 43 | if (domain == 0 && reg < 256 && raw_pci_ops) | 
|---|
| 44 | return raw_pci_ops->read(domain, bus, devfn, reg, len, val); | 
|---|
| 45 | if (raw_pci_ext_ops) | 
|---|
| 46 | return raw_pci_ext_ops->read(domain, bus, devfn, reg, len, val); | 
|---|
| 47 | return -EINVAL; | 
|---|
| 48 | } | 
|---|
| 49 |  | 
|---|
| 50 | int raw_pci_write(unsigned int domain, unsigned int bus, unsigned int devfn, | 
|---|
| 51 | int reg, int len, u32 val) | 
|---|
| 52 | { | 
|---|
| 53 | if (domain == 0 && reg < 256 && raw_pci_ops) | 
|---|
| 54 | return raw_pci_ops->write(domain, bus, devfn, reg, len, val); | 
|---|
| 55 | if (raw_pci_ext_ops) | 
|---|
| 56 | return raw_pci_ext_ops->write(domain, bus, devfn, reg, len, val); | 
|---|
| 57 | return -EINVAL; | 
|---|
| 58 | } | 
|---|
| 59 |  | 
|---|
| 60 | static int pci_read(struct pci_bus *bus, unsigned int devfn, int where, int size, u32 *value) | 
|---|
| 61 | { | 
|---|
| 62 | return raw_pci_read(domain: pci_domain_nr(bus), bus: bus->number, | 
|---|
| 63 | devfn, reg: where, len: size, val: value); | 
|---|
| 64 | } | 
|---|
| 65 |  | 
|---|
| 66 | static int pci_write(struct pci_bus *bus, unsigned int devfn, int where, int size, u32 value) | 
|---|
| 67 | { | 
|---|
| 68 | return raw_pci_write(domain: pci_domain_nr(bus), bus: bus->number, | 
|---|
| 69 | devfn, reg: where, len: size, val: value); | 
|---|
| 70 | } | 
|---|
| 71 |  | 
|---|
| 72 | struct pci_ops pci_root_ops = { | 
|---|
| 73 | .read = pci_read, | 
|---|
| 74 | .write = pci_write, | 
|---|
| 75 | }; | 
|---|
| 76 |  | 
|---|
| 77 | /* | 
|---|
| 78 | * This interrupt-safe spinlock protects all accesses to PCI configuration | 
|---|
| 79 | * space, except for the mmconfig (ECAM) based operations. | 
|---|
| 80 | */ | 
|---|
| 81 | DEFINE_RAW_SPINLOCK(pci_config_lock); | 
|---|
| 82 |  | 
|---|
| 83 | static int __init can_skip_ioresource_align(const struct dmi_system_id *d) | 
|---|
| 84 | { | 
|---|
| 85 | pci_probe |= PCI_CAN_SKIP_ISA_ALIGN; | 
|---|
| 86 | printk(KERN_INFO "PCI: %s detected, can skip ISA alignment\n", d->ident); | 
|---|
| 87 | return 0; | 
|---|
| 88 | } | 
|---|
| 89 |  | 
|---|
| 90 | static const struct dmi_system_id can_skip_pciprobe_dmi_table[] __initconst = { | 
|---|
| 91 | /* | 
|---|
| 92 | * Systems where PCI IO resource ISA alignment can be skipped | 
|---|
| 93 | * when the ISA enable bit in the bridge control is not set | 
|---|
| 94 | */ | 
|---|
| 95 | { | 
|---|
| 96 | .callback = can_skip_ioresource_align, | 
|---|
| 97 | .ident = "IBM System x3800", | 
|---|
| 98 | .matches = { | 
|---|
| 99 | DMI_MATCH(DMI_SYS_VENDOR, "IBM"), | 
|---|
| 100 | DMI_MATCH(DMI_PRODUCT_NAME, "x3800"), | 
|---|
| 101 | }, | 
|---|
| 102 | }, | 
|---|
| 103 | { | 
|---|
| 104 | .callback = can_skip_ioresource_align, | 
|---|
| 105 | .ident = "IBM System x3850", | 
|---|
| 106 | .matches = { | 
|---|
| 107 | DMI_MATCH(DMI_SYS_VENDOR, "IBM"), | 
|---|
| 108 | DMI_MATCH(DMI_PRODUCT_NAME, "x3850"), | 
|---|
| 109 | }, | 
|---|
| 110 | }, | 
|---|
| 111 | { | 
|---|
| 112 | .callback = can_skip_ioresource_align, | 
|---|
| 113 | .ident = "IBM System x3950", | 
|---|
| 114 | .matches = { | 
|---|
| 115 | DMI_MATCH(DMI_SYS_VENDOR, "IBM"), | 
|---|
| 116 | DMI_MATCH(DMI_PRODUCT_NAME, "x3950"), | 
|---|
| 117 | }, | 
|---|
| 118 | }, | 
|---|
| 119 | {} | 
|---|
| 120 | }; | 
|---|
| 121 |  | 
|---|
| 122 | void __init dmi_check_skip_isa_align(void) | 
|---|
| 123 | { | 
|---|
| 124 | dmi_check_system(list: can_skip_pciprobe_dmi_table); | 
|---|
| 125 | } | 
|---|
| 126 |  | 
|---|
| 127 | static void pcibios_fixup_device_resources(struct pci_dev *dev) | 
|---|
| 128 | { | 
|---|
| 129 | struct resource *rom_r = &dev->resource[PCI_ROM_RESOURCE]; | 
|---|
| 130 | struct resource *bar_r; | 
|---|
| 131 | int bar; | 
|---|
| 132 |  | 
|---|
| 133 | if (pci_probe & PCI_NOASSIGN_BARS) { | 
|---|
| 134 | /* | 
|---|
| 135 | * If the BIOS did not assign the BAR, zero out the | 
|---|
| 136 | * resource so the kernel doesn't attempt to assign | 
|---|
| 137 | * it later on in pci_assign_unassigned_resources | 
|---|
| 138 | */ | 
|---|
| 139 | for (bar = 0; bar < PCI_STD_NUM_BARS; bar++) { | 
|---|
| 140 | bar_r = &dev->resource[bar]; | 
|---|
| 141 | if (bar_r->start == 0 && bar_r->end != 0) { | 
|---|
| 142 | bar_r->flags = 0; | 
|---|
| 143 | bar_r->end = 0; | 
|---|
| 144 | } | 
|---|
| 145 | } | 
|---|
| 146 | } | 
|---|
| 147 |  | 
|---|
| 148 | if (pci_probe & PCI_NOASSIGN_ROMS) { | 
|---|
| 149 | if (rom_r->parent) | 
|---|
| 150 | return; | 
|---|
| 151 | if (rom_r->start) { | 
|---|
| 152 | /* we deal with BIOS assigned ROM later */ | 
|---|
| 153 | return; | 
|---|
| 154 | } | 
|---|
| 155 | rom_r->start = rom_r->end = rom_r->flags = 0; | 
|---|
| 156 | } | 
|---|
| 157 | } | 
|---|
| 158 |  | 
|---|
| 159 | /* | 
|---|
| 160 | *  Called after each bus is probed, but before its children | 
|---|
| 161 | *  are examined. | 
|---|
| 162 | */ | 
|---|
| 163 |  | 
|---|
| 164 | void pcibios_fixup_bus(struct pci_bus *b) | 
|---|
| 165 | { | 
|---|
| 166 | struct pci_dev *dev; | 
|---|
| 167 |  | 
|---|
| 168 | pci_read_bridge_bases(child: b); | 
|---|
| 169 | list_for_each_entry(dev, &b->devices, bus_list) | 
|---|
| 170 | pcibios_fixup_device_resources(dev); | 
|---|
| 171 | } | 
|---|
| 172 |  | 
|---|
| 173 | void pcibios_add_bus(struct pci_bus *bus) | 
|---|
| 174 | { | 
|---|
| 175 | acpi_pci_add_bus(bus); | 
|---|
| 176 | } | 
|---|
| 177 |  | 
|---|
| 178 | void pcibios_remove_bus(struct pci_bus *bus) | 
|---|
| 179 | { | 
|---|
| 180 | acpi_pci_remove_bus(bus); | 
|---|
| 181 | } | 
|---|
| 182 |  | 
|---|
| 183 | /* | 
|---|
| 184 | * Only use DMI information to set this if nothing was passed | 
|---|
| 185 | * on the kernel command line (which was parsed earlier). | 
|---|
| 186 | */ | 
|---|
| 187 |  | 
|---|
| 188 | static int __init set_bf_sort(const struct dmi_system_id *d) | 
|---|
| 189 | { | 
|---|
| 190 | if (pci_bf_sort == pci_bf_sort_default) { | 
|---|
| 191 | pci_bf_sort = pci_dmi_bf; | 
|---|
| 192 | printk(KERN_INFO "PCI: %s detected, enabling pci=bfsort.\n", d->ident); | 
|---|
| 193 | } | 
|---|
| 194 | return 0; | 
|---|
| 195 | } | 
|---|
| 196 |  | 
|---|
| 197 | static void __init read_dmi_type_b1(const struct dmi_header *dm, | 
|---|
| 198 | void *private_data) | 
|---|
| 199 | { | 
|---|
| 200 | u8 *data = (u8 *)dm + 4; | 
|---|
| 201 |  | 
|---|
| 202 | if (dm->type != 0xB1) | 
|---|
| 203 | return; | 
|---|
| 204 | if ((((*(u32 *)data) >> 9) & 0x03) == 0x01) | 
|---|
| 205 | set_bf_sort((const struct dmi_system_id *)private_data); | 
|---|
| 206 | } | 
|---|
| 207 |  | 
|---|
| 208 | static int __init find_sort_method(const struct dmi_system_id *d) | 
|---|
| 209 | { | 
|---|
| 210 | dmi_walk(decode: read_dmi_type_b1, private_data: (void *)d); | 
|---|
| 211 | return 0; | 
|---|
| 212 | } | 
|---|
| 213 |  | 
|---|
| 214 | /* | 
|---|
| 215 | * Enable renumbering of PCI bus# ranges to reach all PCI busses (Cardbus) | 
|---|
| 216 | */ | 
|---|
| 217 | #ifdef __i386__ | 
|---|
| 218 | static int __init assign_all_busses(const struct dmi_system_id *d) | 
|---|
| 219 | { | 
|---|
| 220 | pci_probe |= PCI_ASSIGN_ALL_BUSSES; | 
|---|
| 221 | printk(KERN_INFO "%s detected: enabling PCI bus# renumbering" | 
|---|
| 222 | " (pci=assign-busses)\n", d->ident); | 
|---|
| 223 | return 0; | 
|---|
| 224 | } | 
|---|
| 225 | #endif | 
|---|
| 226 |  | 
|---|
| 227 | static int __init set_scan_all(const struct dmi_system_id *d) | 
|---|
| 228 | { | 
|---|
| 229 | printk(KERN_INFO "PCI: %s detected, enabling pci=pcie_scan_all\n", | 
|---|
| 230 | d->ident); | 
|---|
| 231 | pci_add_flags(flags: PCI_SCAN_ALL_PCIE_DEVS); | 
|---|
| 232 | return 0; | 
|---|
| 233 | } | 
|---|
| 234 |  | 
|---|
| 235 | static const struct dmi_system_id pciprobe_dmi_table[] __initconst = { | 
|---|
| 236 | #ifdef __i386__ | 
|---|
| 237 | /* | 
|---|
| 238 | * Laptops which need pci=assign-busses to see Cardbus cards | 
|---|
| 239 | */ | 
|---|
| 240 | { | 
|---|
| 241 | .callback = assign_all_busses, | 
|---|
| 242 | .ident = "Samsung X20 Laptop", | 
|---|
| 243 | .matches = { | 
|---|
| 244 | DMI_MATCH(DMI_SYS_VENDOR, "Samsung Electronics"), | 
|---|
| 245 | DMI_MATCH(DMI_PRODUCT_NAME, "SX20S"), | 
|---|
| 246 | }, | 
|---|
| 247 | }, | 
|---|
| 248 | #endif		/* __i386__ */ | 
|---|
| 249 | { | 
|---|
| 250 | .callback = set_bf_sort, | 
|---|
| 251 | .ident = "Dell PowerEdge 1950", | 
|---|
| 252 | .matches = { | 
|---|
| 253 | DMI_MATCH(DMI_SYS_VENDOR, "Dell"), | 
|---|
| 254 | DMI_MATCH(DMI_PRODUCT_NAME, "PowerEdge 1950"), | 
|---|
| 255 | }, | 
|---|
| 256 | }, | 
|---|
| 257 | { | 
|---|
| 258 | .callback = set_bf_sort, | 
|---|
| 259 | .ident = "Dell PowerEdge 1955", | 
|---|
| 260 | .matches = { | 
|---|
| 261 | DMI_MATCH(DMI_SYS_VENDOR, "Dell"), | 
|---|
| 262 | DMI_MATCH(DMI_PRODUCT_NAME, "PowerEdge 1955"), | 
|---|
| 263 | }, | 
|---|
| 264 | }, | 
|---|
| 265 | { | 
|---|
| 266 | .callback = set_bf_sort, | 
|---|
| 267 | .ident = "Dell PowerEdge 2900", | 
|---|
| 268 | .matches = { | 
|---|
| 269 | DMI_MATCH(DMI_SYS_VENDOR, "Dell"), | 
|---|
| 270 | DMI_MATCH(DMI_PRODUCT_NAME, "PowerEdge 2900"), | 
|---|
| 271 | }, | 
|---|
| 272 | }, | 
|---|
| 273 | { | 
|---|
| 274 | .callback = set_bf_sort, | 
|---|
| 275 | .ident = "Dell PowerEdge 2950", | 
|---|
| 276 | .matches = { | 
|---|
| 277 | DMI_MATCH(DMI_SYS_VENDOR, "Dell"), | 
|---|
| 278 | DMI_MATCH(DMI_PRODUCT_NAME, "PowerEdge 2950"), | 
|---|
| 279 | }, | 
|---|
| 280 | }, | 
|---|
| 281 | { | 
|---|
| 282 | .callback = set_bf_sort, | 
|---|
| 283 | .ident = "Dell PowerEdge R900", | 
|---|
| 284 | .matches = { | 
|---|
| 285 | DMI_MATCH(DMI_SYS_VENDOR, "Dell"), | 
|---|
| 286 | DMI_MATCH(DMI_PRODUCT_NAME, "PowerEdge R900"), | 
|---|
| 287 | }, | 
|---|
| 288 | }, | 
|---|
| 289 | { | 
|---|
| 290 | .callback = find_sort_method, | 
|---|
| 291 | .ident = "Dell System", | 
|---|
| 292 | .matches = { | 
|---|
| 293 | DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc"), | 
|---|
| 294 | }, | 
|---|
| 295 | }, | 
|---|
| 296 | { | 
|---|
| 297 | .callback = set_bf_sort, | 
|---|
| 298 | .ident = "HP ProLiant BL20p G3", | 
|---|
| 299 | .matches = { | 
|---|
| 300 | DMI_MATCH(DMI_SYS_VENDOR, "HP"), | 
|---|
| 301 | DMI_MATCH(DMI_PRODUCT_NAME, "ProLiant BL20p G3"), | 
|---|
| 302 | }, | 
|---|
| 303 | }, | 
|---|
| 304 | { | 
|---|
| 305 | .callback = set_bf_sort, | 
|---|
| 306 | .ident = "HP ProLiant BL20p G4", | 
|---|
| 307 | .matches = { | 
|---|
| 308 | DMI_MATCH(DMI_SYS_VENDOR, "HP"), | 
|---|
| 309 | DMI_MATCH(DMI_PRODUCT_NAME, "ProLiant BL20p G4"), | 
|---|
| 310 | }, | 
|---|
| 311 | }, | 
|---|
| 312 | { | 
|---|
| 313 | .callback = set_bf_sort, | 
|---|
| 314 | .ident = "HP ProLiant BL30p G1", | 
|---|
| 315 | .matches = { | 
|---|
| 316 | DMI_MATCH(DMI_SYS_VENDOR, "HP"), | 
|---|
| 317 | DMI_MATCH(DMI_PRODUCT_NAME, "ProLiant BL30p G1"), | 
|---|
| 318 | }, | 
|---|
| 319 | }, | 
|---|
| 320 | { | 
|---|
| 321 | .callback = set_bf_sort, | 
|---|
| 322 | .ident = "HP ProLiant BL25p G1", | 
|---|
| 323 | .matches = { | 
|---|
| 324 | DMI_MATCH(DMI_SYS_VENDOR, "HP"), | 
|---|
| 325 | DMI_MATCH(DMI_PRODUCT_NAME, "ProLiant BL25p G1"), | 
|---|
| 326 | }, | 
|---|
| 327 | }, | 
|---|
| 328 | { | 
|---|
| 329 | .callback = set_bf_sort, | 
|---|
| 330 | .ident = "HP ProLiant BL35p G1", | 
|---|
| 331 | .matches = { | 
|---|
| 332 | DMI_MATCH(DMI_SYS_VENDOR, "HP"), | 
|---|
| 333 | DMI_MATCH(DMI_PRODUCT_NAME, "ProLiant BL35p G1"), | 
|---|
| 334 | }, | 
|---|
| 335 | }, | 
|---|
| 336 | { | 
|---|
| 337 | .callback = set_bf_sort, | 
|---|
| 338 | .ident = "HP ProLiant BL45p G1", | 
|---|
| 339 | .matches = { | 
|---|
| 340 | DMI_MATCH(DMI_SYS_VENDOR, "HP"), | 
|---|
| 341 | DMI_MATCH(DMI_PRODUCT_NAME, "ProLiant BL45p G1"), | 
|---|
| 342 | }, | 
|---|
| 343 | }, | 
|---|
| 344 | { | 
|---|
| 345 | .callback = set_bf_sort, | 
|---|
| 346 | .ident = "HP ProLiant BL45p G2", | 
|---|
| 347 | .matches = { | 
|---|
| 348 | DMI_MATCH(DMI_SYS_VENDOR, "HP"), | 
|---|
| 349 | DMI_MATCH(DMI_PRODUCT_NAME, "ProLiant BL45p G2"), | 
|---|
| 350 | }, | 
|---|
| 351 | }, | 
|---|
| 352 | { | 
|---|
| 353 | .callback = set_bf_sort, | 
|---|
| 354 | .ident = "HP ProLiant BL460c G1", | 
|---|
| 355 | .matches = { | 
|---|
| 356 | DMI_MATCH(DMI_SYS_VENDOR, "HP"), | 
|---|
| 357 | DMI_MATCH(DMI_PRODUCT_NAME, "ProLiant BL460c G1"), | 
|---|
| 358 | }, | 
|---|
| 359 | }, | 
|---|
| 360 | { | 
|---|
| 361 | .callback = set_bf_sort, | 
|---|
| 362 | .ident = "HP ProLiant BL465c G1", | 
|---|
| 363 | .matches = { | 
|---|
| 364 | DMI_MATCH(DMI_SYS_VENDOR, "HP"), | 
|---|
| 365 | DMI_MATCH(DMI_PRODUCT_NAME, "ProLiant BL465c G1"), | 
|---|
| 366 | }, | 
|---|
| 367 | }, | 
|---|
| 368 | { | 
|---|
| 369 | .callback = set_bf_sort, | 
|---|
| 370 | .ident = "HP ProLiant BL480c G1", | 
|---|
| 371 | .matches = { | 
|---|
| 372 | DMI_MATCH(DMI_SYS_VENDOR, "HP"), | 
|---|
| 373 | DMI_MATCH(DMI_PRODUCT_NAME, "ProLiant BL480c G1"), | 
|---|
| 374 | }, | 
|---|
| 375 | }, | 
|---|
| 376 | { | 
|---|
| 377 | .callback = set_bf_sort, | 
|---|
| 378 | .ident = "HP ProLiant BL685c G1", | 
|---|
| 379 | .matches = { | 
|---|
| 380 | DMI_MATCH(DMI_SYS_VENDOR, "HP"), | 
|---|
| 381 | DMI_MATCH(DMI_PRODUCT_NAME, "ProLiant BL685c G1"), | 
|---|
| 382 | }, | 
|---|
| 383 | }, | 
|---|
| 384 | { | 
|---|
| 385 | .callback = set_bf_sort, | 
|---|
| 386 | .ident = "HP ProLiant DL360", | 
|---|
| 387 | .matches = { | 
|---|
| 388 | DMI_MATCH(DMI_SYS_VENDOR, "HP"), | 
|---|
| 389 | DMI_MATCH(DMI_PRODUCT_NAME, "ProLiant DL360"), | 
|---|
| 390 | }, | 
|---|
| 391 | }, | 
|---|
| 392 | { | 
|---|
| 393 | .callback = set_bf_sort, | 
|---|
| 394 | .ident = "HP ProLiant DL380", | 
|---|
| 395 | .matches = { | 
|---|
| 396 | DMI_MATCH(DMI_SYS_VENDOR, "HP"), | 
|---|
| 397 | DMI_MATCH(DMI_PRODUCT_NAME, "ProLiant DL380"), | 
|---|
| 398 | }, | 
|---|
| 399 | }, | 
|---|
| 400 | #ifdef __i386__ | 
|---|
| 401 | { | 
|---|
| 402 | .callback = assign_all_busses, | 
|---|
| 403 | .ident = "Compaq EVO N800c", | 
|---|
| 404 | .matches = { | 
|---|
| 405 | DMI_MATCH(DMI_SYS_VENDOR, "Compaq"), | 
|---|
| 406 | DMI_MATCH(DMI_PRODUCT_NAME, "EVO N800c"), | 
|---|
| 407 | }, | 
|---|
| 408 | }, | 
|---|
| 409 | #endif | 
|---|
| 410 | { | 
|---|
| 411 | .callback = set_bf_sort, | 
|---|
| 412 | .ident = "HP ProLiant DL385 G2", | 
|---|
| 413 | .matches = { | 
|---|
| 414 | DMI_MATCH(DMI_SYS_VENDOR, "HP"), | 
|---|
| 415 | DMI_MATCH(DMI_PRODUCT_NAME, "ProLiant DL385 G2"), | 
|---|
| 416 | }, | 
|---|
| 417 | }, | 
|---|
| 418 | { | 
|---|
| 419 | .callback = set_bf_sort, | 
|---|
| 420 | .ident = "HP ProLiant DL585 G2", | 
|---|
| 421 | .matches = { | 
|---|
| 422 | DMI_MATCH(DMI_SYS_VENDOR, "HP"), | 
|---|
| 423 | DMI_MATCH(DMI_PRODUCT_NAME, "ProLiant DL585 G2"), | 
|---|
| 424 | }, | 
|---|
| 425 | }, | 
|---|
| 426 | { | 
|---|
| 427 | .callback = set_scan_all, | 
|---|
| 428 | .ident = "Stratus/NEC ftServer", | 
|---|
| 429 | .matches = { | 
|---|
| 430 | DMI_MATCH(DMI_SYS_VENDOR, "Stratus"), | 
|---|
| 431 | DMI_MATCH(DMI_PRODUCT_NAME, "ftServer"), | 
|---|
| 432 | }, | 
|---|
| 433 | }, | 
|---|
| 434 | { | 
|---|
| 435 | .callback = set_scan_all, | 
|---|
| 436 | .ident = "Stratus/NEC ftServer", | 
|---|
| 437 | .matches = { | 
|---|
| 438 | DMI_MATCH(DMI_SYS_VENDOR, "NEC"), | 
|---|
| 439 | DMI_MATCH(DMI_PRODUCT_NAME, "Express5800/R32"), | 
|---|
| 440 | }, | 
|---|
| 441 | }, | 
|---|
| 442 | { | 
|---|
| 443 | .callback = set_scan_all, | 
|---|
| 444 | .ident = "Stratus/NEC ftServer", | 
|---|
| 445 | .matches = { | 
|---|
| 446 | DMI_MATCH(DMI_SYS_VENDOR, "NEC"), | 
|---|
| 447 | DMI_MATCH(DMI_PRODUCT_NAME, "Express5800/R31"), | 
|---|
| 448 | }, | 
|---|
| 449 | }, | 
|---|
| 450 | {} | 
|---|
| 451 | }; | 
|---|
| 452 |  | 
|---|
| 453 | void __init dmi_check_pciprobe(void) | 
|---|
| 454 | { | 
|---|
| 455 | dmi_check_system(list: pciprobe_dmi_table); | 
|---|
| 456 | } | 
|---|
| 457 |  | 
|---|
| 458 | void pcibios_scan_root(int busnum) | 
|---|
| 459 | { | 
|---|
| 460 | struct pci_bus *bus; | 
|---|
| 461 | struct pci_sysdata *sd; | 
|---|
| 462 | LIST_HEAD(resources); | 
|---|
| 463 |  | 
|---|
| 464 | sd = kzalloc(sizeof(*sd), GFP_KERNEL); | 
|---|
| 465 | if (!sd) { | 
|---|
| 466 | printk(KERN_ERR "PCI: OOM, skipping PCI bus %02x\n", busnum); | 
|---|
| 467 | return; | 
|---|
| 468 | } | 
|---|
| 469 | sd->node = x86_pci_root_bus_node(bus: busnum); | 
|---|
| 470 | x86_pci_root_bus_resources(bus: busnum, resources: &resources); | 
|---|
| 471 | printk(KERN_DEBUG "PCI: Probing PCI hardware (bus %02x)\n", busnum); | 
|---|
| 472 | bus = pci_scan_root_bus(NULL, bus: busnum, ops: &pci_root_ops, sysdata: sd, resources: &resources); | 
|---|
| 473 | if (!bus) { | 
|---|
| 474 | pci_free_resource_list(resources: &resources); | 
|---|
| 475 | kfree(objp: sd); | 
|---|
| 476 | return; | 
|---|
| 477 | } | 
|---|
| 478 | pci_bus_add_devices(bus); | 
|---|
| 479 | } | 
|---|
| 480 |  | 
|---|
| 481 | void __init pcibios_set_cache_line_size(void) | 
|---|
| 482 | { | 
|---|
| 483 | struct cpuinfo_x86 *c = &boot_cpu_data; | 
|---|
| 484 |  | 
|---|
| 485 | /* | 
|---|
| 486 | * Set PCI cacheline size to that of the CPU if the CPU has reported it. | 
|---|
| 487 | * (For older CPUs that don't support cpuid, we se it to 32 bytes | 
|---|
| 488 | * It's also good for 386/486s (which actually have 16) | 
|---|
| 489 | * as quite a few PCI devices do not support smaller values. | 
|---|
| 490 | */ | 
|---|
| 491 | if (c->x86_clflush_size > 0) { | 
|---|
| 492 | pci_dfl_cache_line_size = c->x86_clflush_size >> 2; | 
|---|
| 493 | printk(KERN_DEBUG "PCI: pci_cache_line_size set to %d bytes\n", | 
|---|
| 494 | pci_dfl_cache_line_size << 2); | 
|---|
| 495 | } else { | 
|---|
| 496 | pci_dfl_cache_line_size = 32 >> 2; | 
|---|
| 497 | printk(KERN_DEBUG "PCI: Unknown cacheline size. Setting to 32 bytes\n"); | 
|---|
| 498 | } | 
|---|
| 499 | } | 
|---|
| 500 |  | 
|---|
| 501 | int __init pcibios_init(void) | 
|---|
| 502 | { | 
|---|
| 503 | if (!raw_pci_ops && !raw_pci_ext_ops) { | 
|---|
| 504 | printk(KERN_WARNING "PCI: System does not support PCI\n"); | 
|---|
| 505 | return 0; | 
|---|
| 506 | } | 
|---|
| 507 |  | 
|---|
| 508 | pcibios_set_cache_line_size(); | 
|---|
| 509 | pcibios_resource_survey(); | 
|---|
| 510 |  | 
|---|
| 511 | if (pci_bf_sort >= pci_force_bf) | 
|---|
| 512 | pci_sort_breadthfirst(); | 
|---|
| 513 | return 0; | 
|---|
| 514 | } | 
|---|
| 515 |  | 
|---|
| 516 | char *__init pcibios_setup(char *str) | 
|---|
| 517 | { | 
|---|
| 518 | if (!strcmp(str, "off")) { | 
|---|
| 519 | pci_probe = 0; | 
|---|
| 520 | return NULL; | 
|---|
| 521 | } else if (!strcmp(str, "bfsort")) { | 
|---|
| 522 | pci_bf_sort = pci_force_bf; | 
|---|
| 523 | return NULL; | 
|---|
| 524 | } else if (!strcmp(str, "nobfsort")) { | 
|---|
| 525 | pci_bf_sort = pci_force_nobf; | 
|---|
| 526 | return NULL; | 
|---|
| 527 | } | 
|---|
| 528 | #ifdef CONFIG_PCI_BIOS | 
|---|
| 529 | else if (!strcmp(str, "bios")) { | 
|---|
| 530 | pci_probe = PCI_PROBE_BIOS; | 
|---|
| 531 | return NULL; | 
|---|
| 532 | } else if (!strcmp(str, "nobios")) { | 
|---|
| 533 | pci_probe &= ~PCI_PROBE_BIOS; | 
|---|
| 534 | return NULL; | 
|---|
| 535 | } else if (!strcmp(str, "biosirq")) { | 
|---|
| 536 | pci_probe |= PCI_BIOS_IRQ_SCAN; | 
|---|
| 537 | return NULL; | 
|---|
| 538 | } else if (!strncmp(str, "pirqaddr=", 9)) { | 
|---|
| 539 | pirq_table_addr = simple_strtoul(str+9, NULL, 0); | 
|---|
| 540 | return NULL; | 
|---|
| 541 | } | 
|---|
| 542 | #endif | 
|---|
| 543 | #ifdef CONFIG_PCI_DIRECT | 
|---|
| 544 | else if (!strcmp(str, "conf1")) { | 
|---|
| 545 | pci_probe = PCI_PROBE_CONF1 | PCI_NO_CHECKS; | 
|---|
| 546 | return NULL; | 
|---|
| 547 | } | 
|---|
| 548 | else if (!strcmp(str, "conf2")) { | 
|---|
| 549 | pci_probe = PCI_PROBE_CONF2 | PCI_NO_CHECKS; | 
|---|
| 550 | return NULL; | 
|---|
| 551 | } | 
|---|
| 552 | #endif | 
|---|
| 553 | #ifdef CONFIG_PCI_MMCONFIG | 
|---|
| 554 | else if (!strcmp(str, "nommconf")) { | 
|---|
| 555 | pci_probe &= ~PCI_PROBE_MMCONF; | 
|---|
| 556 | return NULL; | 
|---|
| 557 | } | 
|---|
| 558 | else if (!strcmp(str, "check_enable_amd_mmconf")) { | 
|---|
| 559 | pci_probe |= PCI_CHECK_ENABLE_AMD_MMCONF; | 
|---|
| 560 | return NULL; | 
|---|
| 561 | } | 
|---|
| 562 | #endif | 
|---|
| 563 | else if (!strcmp(str, "noacpi")) { | 
|---|
| 564 | acpi_noirq_set(); | 
|---|
| 565 | return NULL; | 
|---|
| 566 | } | 
|---|
| 567 | else if (!strcmp(str, "noearly")) { | 
|---|
| 568 | pci_probe |= PCI_PROBE_NOEARLY; | 
|---|
| 569 | return NULL; | 
|---|
| 570 | } | 
|---|
| 571 | else if (!strcmp(str, "usepirqmask")) { | 
|---|
| 572 | pci_probe |= PCI_USE_PIRQ_MASK; | 
|---|
| 573 | return NULL; | 
|---|
| 574 | } else if (!strncmp(str, "irqmask=", 8)) { | 
|---|
| 575 | pcibios_irq_mask = simple_strtol(str+8, NULL, 0); | 
|---|
| 576 | return NULL; | 
|---|
| 577 | } else if (!strncmp(str, "lastbus=", 8)) { | 
|---|
| 578 | pcibios_last_bus = simple_strtol(str+8, NULL, 0); | 
|---|
| 579 | return NULL; | 
|---|
| 580 | } else if (!strcmp(str, "rom")) { | 
|---|
| 581 | pci_probe |= PCI_ASSIGN_ROMS; | 
|---|
| 582 | return NULL; | 
|---|
| 583 | } else if (!strcmp(str, "norom")) { | 
|---|
| 584 | pci_probe |= PCI_NOASSIGN_ROMS; | 
|---|
| 585 | return NULL; | 
|---|
| 586 | } else if (!strcmp(str, "nobar")) { | 
|---|
| 587 | pci_probe |= PCI_NOASSIGN_BARS; | 
|---|
| 588 | return NULL; | 
|---|
| 589 | } else if (!strcmp(str, "assign-busses")) { | 
|---|
| 590 | pci_probe |= PCI_ASSIGN_ALL_BUSSES; | 
|---|
| 591 | return NULL; | 
|---|
| 592 | } else if (!strcmp(str, "use_crs")) { | 
|---|
| 593 | pci_probe |= PCI_USE__CRS; | 
|---|
| 594 | return NULL; | 
|---|
| 595 | } else if (!strcmp(str, "nocrs")) { | 
|---|
| 596 | pci_probe |= PCI_ROOT_NO_CRS; | 
|---|
| 597 | return NULL; | 
|---|
| 598 | } else if (!strcmp(str, "use_e820")) { | 
|---|
| 599 | pci_probe |= PCI_USE_E820; | 
|---|
| 600 | add_taint(TAINT_FIRMWARE_WORKAROUND, LOCKDEP_STILL_OK); | 
|---|
| 601 | return NULL; | 
|---|
| 602 | } else if (!strcmp(str, "no_e820")) { | 
|---|
| 603 | pci_probe |= PCI_NO_E820; | 
|---|
| 604 | add_taint(TAINT_FIRMWARE_WORKAROUND, LOCKDEP_STILL_OK); | 
|---|
| 605 | return NULL; | 
|---|
| 606 | #ifdef CONFIG_PHYS_ADDR_T_64BIT | 
|---|
| 607 | } else if (!strcmp(str, "big_root_window")) { | 
|---|
| 608 | pci_probe |= PCI_BIG_ROOT_WINDOW; | 
|---|
| 609 | return NULL; | 
|---|
| 610 | #endif | 
|---|
| 611 | } else if (!strcmp(str, "routeirq")) { | 
|---|
| 612 | pci_routeirq = 1; | 
|---|
| 613 | return NULL; | 
|---|
| 614 | } else if (!strcmp(str, "skip_isa_align")) { | 
|---|
| 615 | pci_probe |= PCI_CAN_SKIP_ISA_ALIGN; | 
|---|
| 616 | return NULL; | 
|---|
| 617 | } else if (!strcmp(str, "noioapicquirk")) { | 
|---|
| 618 | noioapicquirk = 1; | 
|---|
| 619 | return NULL; | 
|---|
| 620 | } else if (!strcmp(str, "ioapicreroute")) { | 
|---|
| 621 | if (noioapicreroute != -1) | 
|---|
| 622 | noioapicreroute = 0; | 
|---|
| 623 | return NULL; | 
|---|
| 624 | } else if (!strcmp(str, "noioapicreroute")) { | 
|---|
| 625 | if (noioapicreroute != -1) | 
|---|
| 626 | noioapicreroute = 1; | 
|---|
| 627 | return NULL; | 
|---|
| 628 | } | 
|---|
| 629 | return str; | 
|---|
| 630 | } | 
|---|
| 631 |  | 
|---|
| 632 | unsigned int pcibios_assign_all_busses(void) | 
|---|
| 633 | { | 
|---|
| 634 | return (pci_probe & PCI_ASSIGN_ALL_BUSSES) ? 1 : 0; | 
|---|
| 635 | } | 
|---|
| 636 |  | 
|---|
| 637 | static void set_dev_domain_options(struct pci_dev *pdev) | 
|---|
| 638 | { | 
|---|
| 639 | if (is_vmd(pdev->bus)) | 
|---|
| 640 | pdev->hotplug_user_indicators = 1; | 
|---|
| 641 | } | 
|---|
| 642 |  | 
|---|
| 643 | int pcibios_device_add(struct pci_dev *dev) | 
|---|
| 644 | { | 
|---|
| 645 | struct pci_setup_rom *rom; | 
|---|
| 646 | struct irq_domain *msidom; | 
|---|
| 647 | struct setup_data *data; | 
|---|
| 648 | u64 pa_data; | 
|---|
| 649 |  | 
|---|
| 650 | pa_data = boot_params.hdr.setup_data; | 
|---|
| 651 | while (pa_data) { | 
|---|
| 652 | data = memremap(offset: pa_data, size: sizeof(*rom), flags: MEMREMAP_WB); | 
|---|
| 653 | if (!data) | 
|---|
| 654 | return -ENOMEM; | 
|---|
| 655 |  | 
|---|
| 656 | if (data->type == SETUP_PCI) { | 
|---|
| 657 | rom = (struct pci_setup_rom *)data; | 
|---|
| 658 |  | 
|---|
| 659 | if ((pci_domain_nr(bus: dev->bus) == rom->segment) && | 
|---|
| 660 | (dev->bus->number == rom->bus) && | 
|---|
| 661 | (PCI_SLOT(dev->devfn) == rom->device) && | 
|---|
| 662 | (PCI_FUNC(dev->devfn) == rom->function) && | 
|---|
| 663 | (dev->vendor == rom->vendor) && | 
|---|
| 664 | (dev->device == rom->devid)) { | 
|---|
| 665 | dev->rom = pa_data + | 
|---|
| 666 | offsetof(struct pci_setup_rom, romdata); | 
|---|
| 667 | dev->romlen = rom->pcilen; | 
|---|
| 668 | } | 
|---|
| 669 | } | 
|---|
| 670 | pa_data = data->next; | 
|---|
| 671 | memunmap(addr: data); | 
|---|
| 672 | } | 
|---|
| 673 | set_dev_domain_options(dev); | 
|---|
| 674 |  | 
|---|
| 675 | /* | 
|---|
| 676 | * Setup the initial MSI domain of the device. If the underlying | 
|---|
| 677 | * bus has a PCI/MSI irqdomain associated use the bus domain, | 
|---|
| 678 | * otherwise set the default domain. This ensures that special irq | 
|---|
| 679 | * domains e.g. VMD are preserved. The default ensures initial | 
|---|
| 680 | * operation if irq remapping is not active. If irq remapping is | 
|---|
| 681 | * active it will overwrite the domain pointer when the device is | 
|---|
| 682 | * associated to a remapping domain. | 
|---|
| 683 | */ | 
|---|
| 684 | msidom = dev_get_msi_domain(dev: &dev->bus->dev); | 
|---|
| 685 | if (!msidom) | 
|---|
| 686 | msidom = x86_pci_msi_default_domain; | 
|---|
| 687 | dev_set_msi_domain(dev: &dev->dev, d: msidom); | 
|---|
| 688 | return 0; | 
|---|
| 689 | } | 
|---|
| 690 |  | 
|---|
| 691 | int pcibios_enable_device(struct pci_dev *dev, int mask) | 
|---|
| 692 | { | 
|---|
| 693 | int err; | 
|---|
| 694 |  | 
|---|
| 695 | if ((err = pci_enable_resources(dev, mask)) < 0) | 
|---|
| 696 | return err; | 
|---|
| 697 |  | 
|---|
| 698 | if (!pci_dev_msi_enabled(pci_dev: dev)) | 
|---|
| 699 | return pcibios_enable_irq(dev); | 
|---|
| 700 | return 0; | 
|---|
| 701 | } | 
|---|
| 702 |  | 
|---|
| 703 | void pcibios_disable_device (struct pci_dev *dev) | 
|---|
| 704 | { | 
|---|
| 705 | if (!pci_dev_msi_enabled(pci_dev: dev) && pcibios_disable_irq) | 
|---|
| 706 | pcibios_disable_irq(dev); | 
|---|
| 707 | } | 
|---|
| 708 |  | 
|---|
| 709 | #ifdef CONFIG_ACPI_HOTPLUG_IOAPIC | 
|---|
| 710 | void pcibios_release_device(struct pci_dev *dev) | 
|---|
| 711 | { | 
|---|
| 712 | if (atomic_dec_return(v: &dev->enable_cnt) >= 0) | 
|---|
| 713 | pcibios_disable_device(dev); | 
|---|
| 714 |  | 
|---|
| 715 | } | 
|---|
| 716 | #endif | 
|---|
| 717 |  | 
|---|
| 718 | int pci_ext_cfg_avail(void) | 
|---|
| 719 | { | 
|---|
| 720 | if (raw_pci_ext_ops) | 
|---|
| 721 | return 1; | 
|---|
| 722 | else | 
|---|
| 723 | return 0; | 
|---|
| 724 | } | 
|---|
| 725 |  | 
|---|
| 726 | #if IS_ENABLED(CONFIG_VMD) | 
|---|
| 727 | struct pci_dev *pci_real_dma_dev(struct pci_dev *dev) | 
|---|
| 728 | { | 
|---|
| 729 | if (is_vmd(dev->bus)) | 
|---|
| 730 | return to_pci_sysdata(dev->bus)->vmd_dev; | 
|---|
| 731 |  | 
|---|
| 732 | return dev; | 
|---|
| 733 | } | 
|---|
| 734 | #endif | 
|---|
| 735 |  | 
|---|