| 1 | /* SPDX-License-Identifier: GPL-2.0-only */ | 
|---|
| 2 | /* | 
|---|
| 3 | * ALPS touchpad PS/2 mouse driver | 
|---|
| 4 | * | 
|---|
| 5 | * Copyright (c) 2003 Peter Osterlund <petero2@telia.com> | 
|---|
| 6 | * Copyright (c) 2005 Vojtech Pavlik <vojtech@suse.cz> | 
|---|
| 7 | */ | 
|---|
| 8 |  | 
|---|
| 9 | #ifndef _ALPS_H | 
|---|
| 10 | #define _ALPS_H | 
|---|
| 11 |  | 
|---|
| 12 | #include <linux/input/mt.h> | 
|---|
| 13 |  | 
|---|
| 14 | #define ALPS_PROTO_V1		0x100 | 
|---|
| 15 | #define ALPS_PROTO_V2		0x200 | 
|---|
| 16 | #define ALPS_PROTO_V3		0x300 | 
|---|
| 17 | #define ALPS_PROTO_V3_RUSHMORE	0x310 | 
|---|
| 18 | #define ALPS_PROTO_V4		0x400 | 
|---|
| 19 | #define ALPS_PROTO_V5		0x500 | 
|---|
| 20 | #define ALPS_PROTO_V6		0x600 | 
|---|
| 21 | #define ALPS_PROTO_V7		0x700	/* t3btl t4s */ | 
|---|
| 22 | #define ALPS_PROTO_V8		0x800	/* SS4btl SS4s */ | 
|---|
| 23 | #define ALPS_PROTO_V9		0x900	/* ss3btl */ | 
|---|
| 24 |  | 
|---|
| 25 | #define MAX_TOUCHES	4 | 
|---|
| 26 |  | 
|---|
| 27 | #define DOLPHIN_COUNT_PER_ELECTRODE	64 | 
|---|
| 28 | #define DOLPHIN_PROFILE_XOFFSET		8	/* x-electrode offset */ | 
|---|
| 29 | #define DOLPHIN_PROFILE_YOFFSET		1	/* y-electrode offset */ | 
|---|
| 30 |  | 
|---|
| 31 | /* | 
|---|
| 32 | * enum SS4_PACKET_ID - defines the packet type for V8 | 
|---|
| 33 | * SS4_PACKET_ID_IDLE: There's no finger and no button activity. | 
|---|
| 34 | * SS4_PACKET_ID_ONE: There's one finger on touchpad | 
|---|
| 35 | *  or there's button activities. | 
|---|
| 36 | * SS4_PACKET_ID_TWO: There's two or more fingers on touchpad | 
|---|
| 37 | * SS4_PACKET_ID_MULTI: There's three or more fingers on touchpad | 
|---|
| 38 | * SS4_PACKET_ID_STICK: A stick pointer packet | 
|---|
| 39 | */ | 
|---|
| 40 | enum SS4_PACKET_ID { | 
|---|
| 41 | SS4_PACKET_ID_IDLE = 0, | 
|---|
| 42 | SS4_PACKET_ID_ONE, | 
|---|
| 43 | SS4_PACKET_ID_TWO, | 
|---|
| 44 | SS4_PACKET_ID_MULTI, | 
|---|
| 45 | SS4_PACKET_ID_STICK, | 
|---|
| 46 | }; | 
|---|
| 47 |  | 
|---|
| 48 | #define SS4_COUNT_PER_ELECTRODE		256 | 
|---|
| 49 | #define SS4_NUMSENSOR_XOFFSET		7 | 
|---|
| 50 | #define SS4_NUMSENSOR_YOFFSET		7 | 
|---|
| 51 | #define SS4_MIN_PITCH_MM		50 | 
|---|
| 52 |  | 
|---|
| 53 | #define SS4_MASK_NORMAL_BUTTONS		0x07 | 
|---|
| 54 |  | 
|---|
| 55 | #define SS4PLUS_COUNT_PER_ELECTRODE	128 | 
|---|
| 56 | #define SS4PLUS_NUMSENSOR_XOFFSET	16 | 
|---|
| 57 | #define SS4PLUS_NUMSENSOR_YOFFSET	5 | 
|---|
| 58 | #define SS4PLUS_MIN_PITCH_MM		37 | 
|---|
| 59 |  | 
|---|
| 60 | #define IS_SS4PLUS_DEV(_b)	(((_b[0]) == 0x73) &&	\ | 
|---|
| 61 | ((_b[1]) == 0x03) &&	\ | 
|---|
| 62 | ((_b[2]) == 0x28)		\ | 
|---|
| 63 | ) | 
|---|
| 64 |  | 
|---|
| 65 | #define SS4_IS_IDLE_V2(_b)	(((_b[0]) == 0x18) &&		\ | 
|---|
| 66 | ((_b[1]) == 0x10) &&		\ | 
|---|
| 67 | ((_b[2]) == 0x00) &&		\ | 
|---|
| 68 | ((_b[3] & 0x88) == 0x08) &&	\ | 
|---|
| 69 | ((_b[4]) == 0x10) &&		\ | 
|---|
| 70 | ((_b[5]) == 0x00)		\ | 
|---|
| 71 | ) | 
|---|
| 72 |  | 
|---|
| 73 | #define SS4_1F_X_V2(_b)		(((_b[0]) & 0x0007) |		\ | 
|---|
| 74 | ((_b[1] << 3) & 0x0078) |	\ | 
|---|
| 75 | ((_b[1] << 2) & 0x0380) |	\ | 
|---|
| 76 | ((_b[2] << 5) & 0x1C00)	\ | 
|---|
| 77 | ) | 
|---|
| 78 |  | 
|---|
| 79 | #define SS4_1F_Y_V2(_b)		(((_b[2]) & 0x000F) |		\ | 
|---|
| 80 | ((_b[3] >> 2) & 0x0030) |	\ | 
|---|
| 81 | ((_b[4] << 6) & 0x03C0) |	\ | 
|---|
| 82 | ((_b[4] << 5) & 0x0C00)	\ | 
|---|
| 83 | ) | 
|---|
| 84 |  | 
|---|
| 85 | #define SS4_1F_Z_V2(_b)		(((_b[5]) & 0x0F) |		\ | 
|---|
| 86 | ((_b[5] >> 1) & 0x70) |	\ | 
|---|
| 87 | ((_b[4]) & 0x80)		\ | 
|---|
| 88 | ) | 
|---|
| 89 |  | 
|---|
| 90 | #define SS4_1F_LFB_V2(_b)	(((_b[2] >> 4) & 0x01) == 0x01) | 
|---|
| 91 |  | 
|---|
| 92 | #define SS4_MF_LF_V2(_b, _i)	((_b[1 + (_i) * 3] & 0x0004) == 0x0004) | 
|---|
| 93 |  | 
|---|
| 94 | #define SS4_BTN_V2(_b)		((_b[0] >> 5) & SS4_MASK_NORMAL_BUTTONS) | 
|---|
| 95 |  | 
|---|
| 96 | #define SS4_STD_MF_X_V2(_b, _i)	(((_b[0 + (_i) * 3] << 5) & 0x00E0) |	\ | 
|---|
| 97 | ((_b[1 + _i * 3]  << 5) & 0x1F00)	\ | 
|---|
| 98 | ) | 
|---|
| 99 |  | 
|---|
| 100 | #define SS4_PLUS_STD_MF_X_V2(_b, _i) (((_b[0 + (_i) * 3] << 4) & 0x0070) | \ | 
|---|
| 101 | ((_b[1 + (_i) * 3]  << 4) & 0x0F80)	\ | 
|---|
| 102 | ) | 
|---|
| 103 |  | 
|---|
| 104 | #define SS4_STD_MF_Y_V2(_b, _i)	(((_b[1 + (_i) * 3] << 3) & 0x0010) |	\ | 
|---|
| 105 | ((_b[2 + (_i) * 3] << 5) & 0x01E0) |	\ | 
|---|
| 106 | ((_b[2 + (_i) * 3] << 4) & 0x0E00)	\ | 
|---|
| 107 | ) | 
|---|
| 108 |  | 
|---|
| 109 | #define SS4_BTL_MF_X_V2(_b, _i)	(SS4_STD_MF_X_V2(_b, _i) |		\ | 
|---|
| 110 | ((_b[0 + (_i) * 3] >> 3) & 0x0010)	\ | 
|---|
| 111 | ) | 
|---|
| 112 |  | 
|---|
| 113 | #define SS4_PLUS_BTL_MF_X_V2(_b, _i) (SS4_PLUS_STD_MF_X_V2(_b, _i) |	\ | 
|---|
| 114 | ((_b[0 + (_i) * 3] >> 4) & 0x0008)	\ | 
|---|
| 115 | ) | 
|---|
| 116 |  | 
|---|
| 117 | #define SS4_BTL_MF_Y_V2(_b, _i)	(SS4_STD_MF_Y_V2(_b, _i) | \ | 
|---|
| 118 | ((_b[0 + (_i) * 3] >> 3) & 0x0008)	\ | 
|---|
| 119 | ) | 
|---|
| 120 |  | 
|---|
| 121 | #define SS4_MF_Z_V2(_b, _i)	(((_b[1 + (_i) * 3]) & 0x0001) |	\ | 
|---|
| 122 | ((_b[1 + (_i) * 3] >> 1) & 0x0002)	\ | 
|---|
| 123 | ) | 
|---|
| 124 |  | 
|---|
| 125 | #define SS4_IS_MF_CONTINUE(_b)	((_b[2] & 0x10) == 0x10) | 
|---|
| 126 | #define SS4_IS_5F_DETECTED(_b)	((_b[2] & 0x10) == 0x10) | 
|---|
| 127 |  | 
|---|
| 128 | #define SS4_TS_X_V2(_b)		(s8)(				\ | 
|---|
| 129 | ((_b[0] & 0x01) << 7) |	\ | 
|---|
| 130 | (_b[1] & 0x7F)		\ | 
|---|
| 131 | ) | 
|---|
| 132 |  | 
|---|
| 133 | #define SS4_TS_Y_V2(_b)		-(s8)(				\ | 
|---|
| 134 | ((_b[3] & 0x01) << 7) |	\ | 
|---|
| 135 | (_b[2] & 0x7F)		\ | 
|---|
| 136 | ) | 
|---|
| 137 |  | 
|---|
| 138 | #define SS4_TS_Z_V2(_b)		(s8)(_b[4] & 0x7F) | 
|---|
| 139 |  | 
|---|
| 140 |  | 
|---|
| 141 | #define SS4_MFPACKET_NO_AX		8160	/* X-Coordinate value */ | 
|---|
| 142 | #define SS4_MFPACKET_NO_AY		4080	/* Y-Coordinate value */ | 
|---|
| 143 | #define SS4_MFPACKET_NO_AX_BL		8176	/* Buttonless X-Coord value */ | 
|---|
| 144 | #define SS4_MFPACKET_NO_AY_BL		4088	/* Buttonless Y-Coord value */ | 
|---|
| 145 | #define SS4_PLUS_MFPACKET_NO_AX		4080	/* SS4 PLUS, X */ | 
|---|
| 146 | #define SS4_PLUS_MFPACKET_NO_AX_BL	4088	/* Buttonless SS4 PLUS, X */ | 
|---|
| 147 |  | 
|---|
| 148 | /* | 
|---|
| 149 | * enum V7_PACKET_ID - defines the packet type for V7 | 
|---|
| 150 | * V7_PACKET_ID_IDLE: There's no finger and no button activity. | 
|---|
| 151 | * V7_PACKET_ID_TWO: There's one or two non-resting fingers on touchpad | 
|---|
| 152 | *  or there's button activities. | 
|---|
| 153 | * V7_PACKET_ID_MULTI: There are at least three non-resting fingers. | 
|---|
| 154 | * V7_PACKET_ID_NEW: The finger position in slot is not continues from | 
|---|
| 155 | *  previous packet. | 
|---|
| 156 | */ | 
|---|
| 157 | enum V7_PACKET_ID { | 
|---|
| 158 | V7_PACKET_ID_IDLE, | 
|---|
| 159 | V7_PACKET_ID_TWO, | 
|---|
| 160 | V7_PACKET_ID_MULTI, | 
|---|
| 161 | V7_PACKET_ID_NEW, | 
|---|
| 162 | V7_PACKET_ID_UNKNOWN, | 
|---|
| 163 | }; | 
|---|
| 164 |  | 
|---|
| 165 | /** | 
|---|
| 166 | * struct alps_protocol_info - information about protocol used by a device | 
|---|
| 167 | * @version: Indicates V1/V2/V3/... | 
|---|
| 168 | * @byte0: Helps figure out whether a position report packet matches the | 
|---|
| 169 | *   known format for this model.  The first byte of the report, ANDed with | 
|---|
| 170 | *   mask0, should match byte0. | 
|---|
| 171 | * @mask0: The mask used to check the first byte of the report. | 
|---|
| 172 | * @flags: Additional device capabilities (passthrough port, trackstick, etc.). | 
|---|
| 173 | */ | 
|---|
| 174 | struct alps_protocol_info { | 
|---|
| 175 | u16 version; | 
|---|
| 176 | u8 byte0, mask0; | 
|---|
| 177 | unsigned int flags; | 
|---|
| 178 | }; | 
|---|
| 179 |  | 
|---|
| 180 | /** | 
|---|
| 181 | * struct alps_model_info - touchpad ID table | 
|---|
| 182 | * @signature: E7 response string to match. | 
|---|
| 183 | * @protocol_info: information about protocol used by the device. | 
|---|
| 184 | * | 
|---|
| 185 | * Many (but not all) ALPS touchpads can be identified by looking at the | 
|---|
| 186 | * values returned in the "E7 report" and/or the "EC report."  This table | 
|---|
| 187 | * lists a number of such touchpads. | 
|---|
| 188 | */ | 
|---|
| 189 | struct alps_model_info { | 
|---|
| 190 | u8 signature[3]; | 
|---|
| 191 | struct alps_protocol_info protocol_info; | 
|---|
| 192 | }; | 
|---|
| 193 |  | 
|---|
| 194 | /** | 
|---|
| 195 | * struct alps_nibble_commands - encodings for register accesses | 
|---|
| 196 | * @command: PS/2 command used for the nibble | 
|---|
| 197 | * @data: Data supplied as an argument to the PS/2 command, if applicable | 
|---|
| 198 | * | 
|---|
| 199 | * The ALPS protocol uses magic sequences to transmit binary data to the | 
|---|
| 200 | * touchpad, as it is generally not OK to send arbitrary bytes out the | 
|---|
| 201 | * PS/2 port.  Each of the sequences in this table sends one nibble of the | 
|---|
| 202 | * register address or (write) data.  Different versions of the ALPS protocol | 
|---|
| 203 | * use slightly different encodings. | 
|---|
| 204 | */ | 
|---|
| 205 | struct alps_nibble_commands { | 
|---|
| 206 | int command; | 
|---|
| 207 | unsigned char data; | 
|---|
| 208 | }; | 
|---|
| 209 |  | 
|---|
| 210 | struct alps_bitmap_point { | 
|---|
| 211 | int start_bit; | 
|---|
| 212 | int num_bits; | 
|---|
| 213 | }; | 
|---|
| 214 |  | 
|---|
| 215 | /** | 
|---|
| 216 | * struct alps_fields - decoded version of the report packet | 
|---|
| 217 | * @x_map: Bitmap of active X positions for MT. | 
|---|
| 218 | * @y_map: Bitmap of active Y positions for MT. | 
|---|
| 219 | * @fingers: Number of fingers for MT. | 
|---|
| 220 | * @pressure: Pressure. | 
|---|
| 221 | * @st: position for ST. | 
|---|
| 222 | * @mt: position for MT. | 
|---|
| 223 | * @first_mp: Packet is the first of a multi-packet report. | 
|---|
| 224 | * @is_mp: Packet is part of a multi-packet report. | 
|---|
| 225 | * @left: Left touchpad button is active. | 
|---|
| 226 | * @right: Right touchpad button is active. | 
|---|
| 227 | * @middle: Middle touchpad button is active. | 
|---|
| 228 | * @ts_left: Left trackstick button is active. | 
|---|
| 229 | * @ts_right: Right trackstick button is active. | 
|---|
| 230 | * @ts_middle: Middle trackstick button is active. | 
|---|
| 231 | */ | 
|---|
| 232 | struct alps_fields { | 
|---|
| 233 | unsigned int x_map; | 
|---|
| 234 | unsigned int y_map; | 
|---|
| 235 | unsigned int fingers; | 
|---|
| 236 |  | 
|---|
| 237 | int pressure; | 
|---|
| 238 | struct input_mt_pos st; | 
|---|
| 239 | struct input_mt_pos mt[MAX_TOUCHES]; | 
|---|
| 240 |  | 
|---|
| 241 | unsigned int first_mp:1; | 
|---|
| 242 | unsigned int is_mp:1; | 
|---|
| 243 |  | 
|---|
| 244 | unsigned int left:1; | 
|---|
| 245 | unsigned int right:1; | 
|---|
| 246 | unsigned int middle:1; | 
|---|
| 247 |  | 
|---|
| 248 | unsigned int ts_left:1; | 
|---|
| 249 | unsigned int ts_right:1; | 
|---|
| 250 | unsigned int ts_middle:1; | 
|---|
| 251 | }; | 
|---|
| 252 |  | 
|---|
| 253 | /** | 
|---|
| 254 | * struct alps_data - private data structure for the ALPS driver | 
|---|
| 255 | * @psmouse: Pointer to parent psmouse device | 
|---|
| 256 | * @dev2: Trackstick device (can be NULL). | 
|---|
| 257 | * @dev3: Generic PS/2 mouse (can be NULL, delayed registering). | 
|---|
| 258 | * @phys2: Physical path for the trackstick device. | 
|---|
| 259 | * @phys3: Physical path for the generic PS/2 mouse. | 
|---|
| 260 | * @dev3_register_work: Delayed work for registering PS/2 mouse. | 
|---|
| 261 | * @nibble_commands: Command mapping used for touchpad register accesses. | 
|---|
| 262 | * @addr_command: Command used to tell the touchpad that a register address | 
|---|
| 263 | *   follows. | 
|---|
| 264 | * @proto_version: Indicates V1/V2/V3/... | 
|---|
| 265 | * @byte0: Helps figure out whether a position report packet matches the | 
|---|
| 266 | *   known format for this model.  The first byte of the report, ANDed with | 
|---|
| 267 | *   mask0, should match byte0. | 
|---|
| 268 | * @mask0: The mask used to check the first byte of the report. | 
|---|
| 269 | * @fw_ver: cached copy of firmware version (EC report) | 
|---|
| 270 | * @flags: Additional device capabilities (passthrough port, trackstick, etc.). | 
|---|
| 271 | * @x_max: Largest possible X position value. | 
|---|
| 272 | * @y_max: Largest possible Y position value. | 
|---|
| 273 | * @x_bits: Number of X bits in the MT bitmap. | 
|---|
| 274 | * @y_bits: Number of Y bits in the MT bitmap. | 
|---|
| 275 | * @hw_init: Protocol-specific hardware init function. | 
|---|
| 276 | * @process_packet: Protocol-specific function to process a report packet. | 
|---|
| 277 | * @decode_fields: Protocol-specific function to read packet bitfields. | 
|---|
| 278 | * @set_abs_params: Protocol-specific function to configure the input_dev. | 
|---|
| 279 | * @prev_fin: Finger bit from previous packet. | 
|---|
| 280 | * @multi_packet: Multi-packet data in progress. | 
|---|
| 281 | * @multi_data: Saved multi-packet data. | 
|---|
| 282 | * @f: Decoded packet data fields. | 
|---|
| 283 | * @quirks: Bitmap of ALPS_QUIRK_*. | 
|---|
| 284 | * @timer: Timer for flushing out the final report packet in the stream. | 
|---|
| 285 | */ | 
|---|
| 286 | struct alps_data { | 
|---|
| 287 | struct psmouse *psmouse; | 
|---|
| 288 | struct input_dev *dev2; | 
|---|
| 289 | struct input_dev *dev3; | 
|---|
| 290 | char phys2[32]; | 
|---|
| 291 | char phys3[32]; | 
|---|
| 292 | struct delayed_work dev3_register_work; | 
|---|
| 293 |  | 
|---|
| 294 | /* these are autodetected when the device is identified */ | 
|---|
| 295 | const struct alps_nibble_commands *nibble_commands; | 
|---|
| 296 | int addr_command; | 
|---|
| 297 | u16 proto_version; | 
|---|
| 298 | u8 byte0, mask0; | 
|---|
| 299 | u8 dev_id[3]; | 
|---|
| 300 | u8 fw_ver[3]; | 
|---|
| 301 | int flags; | 
|---|
| 302 | int x_max; | 
|---|
| 303 | int y_max; | 
|---|
| 304 | int x_bits; | 
|---|
| 305 | int y_bits; | 
|---|
| 306 | unsigned int x_res; | 
|---|
| 307 | unsigned int y_res; | 
|---|
| 308 |  | 
|---|
| 309 | int (*hw_init)(struct psmouse *psmouse); | 
|---|
| 310 | void (*process_packet)(struct psmouse *psmouse); | 
|---|
| 311 | int (*decode_fields)(struct alps_fields *f, unsigned char *p, | 
|---|
| 312 | struct psmouse *psmouse); | 
|---|
| 313 | void (*set_abs_params)(struct alps_data *priv, struct input_dev *dev1); | 
|---|
| 314 |  | 
|---|
| 315 | int prev_fin; | 
|---|
| 316 | int multi_packet; | 
|---|
| 317 | int second_touch; | 
|---|
| 318 | unsigned char multi_data[6]; | 
|---|
| 319 | struct alps_fields f; | 
|---|
| 320 | u8 quirks; | 
|---|
| 321 | struct timer_list timer; | 
|---|
| 322 | }; | 
|---|
| 323 |  | 
|---|
| 324 | #define ALPS_QUIRK_TRACKSTICK_BUTTONS	1 /* trakcstick buttons in trackstick packet */ | 
|---|
| 325 |  | 
|---|
| 326 | int alps_detect(struct psmouse *psmouse, bool set_properties); | 
|---|
| 327 | int alps_init(struct psmouse *psmouse); | 
|---|
| 328 |  | 
|---|
| 329 | #endif | 
|---|
| 330 |  | 
|---|