| 1 | /* SPDX-License-Identifier: GPL-2.0-or-later */ | 
|---|
| 2 | /* | 
|---|
| 3 | Copyright (C) 2004 - 2006 rt2x00 SourceForge Project | 
|---|
| 4 | <http://rt2x00.serialmonkey.com> | 
|---|
| 5 |  | 
|---|
| 6 | */ | 
|---|
| 7 |  | 
|---|
| 8 | /* | 
|---|
| 9 | Module: eeprom_93cx6 | 
|---|
| 10 | Abstract: EEPROM reader datastructures for 93cx6 chipsets. | 
|---|
| 11 | Supported chipsets: 93c46, 93c56 and 93c66. | 
|---|
| 12 | */ | 
|---|
| 13 |  | 
|---|
| 14 | #include <linux/bits.h> | 
|---|
| 15 |  | 
|---|
| 16 | /* | 
|---|
| 17 | * EEPROM operation defines. | 
|---|
| 18 | */ | 
|---|
| 19 | #define PCI_EEPROM_WIDTH_93C46	6 | 
|---|
| 20 | #define PCI_EEPROM_WIDTH_93C56	8 | 
|---|
| 21 | #define PCI_EEPROM_WIDTH_93C66	8 | 
|---|
| 22 | #define PCI_EEPROM_WIDTH_93C86	8 | 
|---|
| 23 | #define PCI_EEPROM_WIDTH_OPCODE	3 | 
|---|
| 24 | #define PCI_EEPROM_WRITE_OPCODE	0x05 | 
|---|
| 25 | #define PCI_EEPROM_ERASE_OPCODE 0x07 | 
|---|
| 26 | #define PCI_EEPROM_READ_OPCODE	0x06 | 
|---|
| 27 | #define PCI_EEPROM_EWDS_OPCODE	0x10 | 
|---|
| 28 | #define PCI_EEPROM_EWEN_OPCODE	0x13 | 
|---|
| 29 |  | 
|---|
| 30 | /** | 
|---|
| 31 | * struct eeprom_93cx6 - control structure for setting the commands | 
|---|
| 32 | * for reading the eeprom data. | 
|---|
| 33 | * @data: private pointer for the driver. | 
|---|
| 34 | * @register_read(struct eeprom_93cx6 *eeprom): handler to | 
|---|
| 35 | * read the eeprom register, this function should set all reg_* fields. | 
|---|
| 36 | * @register_write(struct eeprom_93cx6 *eeprom): handler to | 
|---|
| 37 | * write to the eeprom register by using all reg_* fields. | 
|---|
| 38 | * @width: eeprom width, should be one of the PCI_EEPROM_WIDTH_* defines | 
|---|
| 39 | * @quirks: eeprom or controller quirks | 
|---|
| 40 | * @drive_data: Set if we're driving the data line. | 
|---|
| 41 | * @reg_data_in: register field to indicate data input | 
|---|
| 42 | * @reg_data_out: register field to indicate data output | 
|---|
| 43 | * @reg_data_clock: register field to set the data clock | 
|---|
| 44 | * @reg_chip_select: register field to set the chip select | 
|---|
| 45 | * | 
|---|
| 46 | * This structure is used for the communication between the driver | 
|---|
| 47 | * and the eeprom_93cx6 handlers for reading the eeprom. | 
|---|
| 48 | */ | 
|---|
| 49 | struct eeprom_93cx6 { | 
|---|
| 50 | void *data; | 
|---|
| 51 |  | 
|---|
| 52 | void (*register_read)(struct eeprom_93cx6 *eeprom); | 
|---|
| 53 | void (*register_write)(struct eeprom_93cx6 *eeprom); | 
|---|
| 54 |  | 
|---|
| 55 | int width; | 
|---|
| 56 | unsigned int quirks; | 
|---|
| 57 | /* Some EEPROMs require an extra clock cycle before reading */ | 
|---|
| 58 | #define 	BIT(0) | 
|---|
| 59 |  | 
|---|
| 60 | char drive_data; | 
|---|
| 61 | char reg_data_in; | 
|---|
| 62 | char reg_data_out; | 
|---|
| 63 | char reg_data_clock; | 
|---|
| 64 | char reg_chip_select; | 
|---|
| 65 | }; | 
|---|
| 66 |  | 
|---|
| 67 | extern void eeprom_93cx6_read(struct eeprom_93cx6 *eeprom, | 
|---|
| 68 | const u8 word, u16 *data); | 
|---|
| 69 | extern void eeprom_93cx6_multiread(struct eeprom_93cx6 *eeprom, | 
|---|
| 70 | const u8 word, __le16 *data, const u16 words); | 
|---|
| 71 | extern void eeprom_93cx6_readb(struct eeprom_93cx6 *eeprom, | 
|---|
| 72 | const u8 byte, u8 *data); | 
|---|
| 73 | extern void eeprom_93cx6_multireadb(struct eeprom_93cx6 *eeprom, | 
|---|
| 74 | const u8 byte, u8 *data, const u16 bytes); | 
|---|
| 75 |  | 
|---|
| 76 | extern void eeprom_93cx6_wren(struct eeprom_93cx6 *eeprom, bool enable); | 
|---|
| 77 |  | 
|---|
| 78 | extern void eeprom_93cx6_write(struct eeprom_93cx6 *eeprom, | 
|---|
| 79 | u8 addr, u16 data); | 
|---|
| 80 |  | 
|---|
| 81 | static inline bool (struct eeprom_93cx6 *eeprom) | 
|---|
| 82 | { | 
|---|
| 83 | return eeprom->quirks & PCI_EEPROM_QUIRK_EXTRA_READ_CYCLE; | 
|---|
| 84 | } | 
|---|
| 85 |  | 
|---|