1/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
2#ifndef _UAPI_LINUX_FS_H
3#define _UAPI_LINUX_FS_H
4
5/*
6 * This file has definitions for some important file table structures
7 * and constants and structures used by various generic file system
8 * ioctl's. Please do not make any changes in this file before
9 * sending patches for review to linux-fsdevel@vger.kernel.org and
10 * linux-api@vger.kernel.org.
11 */
12
13#include <linux/limits.h>
14#include <linux/ioctl.h>
15#include <linux/types.h>
16#ifndef __KERNEL__
17#include <linux/fscrypt.h>
18#endif
19
20/* Use of MS_* flags within the kernel is restricted to core mount(2) code. */
21#if !defined(__KERNEL__)
22#include <linux/mount.h>
23#endif
24
25/*
26 * It's silly to have NR_OPEN bigger than NR_FILE, but you can change
27 * the file limit at runtime and only root can increase the per-process
28 * nr_file rlimit, so it's safe to set up a ridiculously high absolute
29 * upper limit on files-per-process.
30 *
31 * Some programs (notably those using select()) may have to be
32 * recompiled to take full advantage of the new limits..
33 */
34
35/* Fixed constants first: */
36#undef NR_OPEN
37#define INR_OPEN_CUR 1024 /* Initial setting for nfile rlimits */
38#define INR_OPEN_MAX 4096 /* Hard limit for nfile rlimits */
39
40#define BLOCK_SIZE_BITS 10
41#define BLOCK_SIZE (1<<BLOCK_SIZE_BITS)
42
43/* flags for integrity meta */
44#define IO_INTEGRITY_CHK_GUARD (1U << 0) /* enforce guard check */
45#define IO_INTEGRITY_CHK_REFTAG (1U << 1) /* enforce ref check */
46#define IO_INTEGRITY_CHK_APPTAG (1U << 2) /* enforce app check */
47
48#define IO_INTEGRITY_VALID_FLAGS (IO_INTEGRITY_CHK_GUARD | \
49 IO_INTEGRITY_CHK_REFTAG | \
50 IO_INTEGRITY_CHK_APPTAG)
51
52#define SEEK_SET 0 /* seek relative to beginning of file */
53#define SEEK_CUR 1 /* seek relative to current file position */
54#define SEEK_END 2 /* seek relative to end of file */
55#define SEEK_DATA 3 /* seek to the next data */
56#define SEEK_HOLE 4 /* seek to the next hole */
57#define SEEK_MAX SEEK_HOLE
58
59#define RENAME_NOREPLACE (1 << 0) /* Don't overwrite target */
60#define RENAME_EXCHANGE (1 << 1) /* Exchange source and dest */
61#define RENAME_WHITEOUT (1 << 2) /* Whiteout source */
62
63/*
64 * The root inode of procfs is guaranteed to always have the same inode number.
65 * For programs that make heavy use of procfs, verifying that the root is a
66 * real procfs root and using openat2(RESOLVE_{NO_{XDEV,MAGICLINKS},BENEATH})
67 * will allow you to make sure you are never tricked into operating on the
68 * wrong procfs file.
69 */
70enum procfs_ino {
71 PROCFS_ROOT_INO = 1,
72};
73
74struct file_clone_range {
75 __s64 src_fd;
76 __u64 src_offset;
77 __u64 src_length;
78 __u64 dest_offset;
79};
80
81struct fstrim_range {
82 __u64 start;
83 __u64 len;
84 __u64 minlen;
85};
86
87/*
88 * We include a length field because some filesystems (vfat) have an identifier
89 * that we do want to expose as a UUID, but doesn't have the standard length.
90 *
91 * We use a fixed size buffer beacuse this interface will, by fiat, never
92 * support "UUIDs" longer than 16 bytes; we don't want to force all downstream
93 * users to have to deal with that.
94 */
95struct fsuuid2 {
96 __u8 len;
97 __u8 uuid[16];
98};
99
100struct fs_sysfs_path {
101 __u8 len;
102 __u8 name[128];
103};
104
105/* Protection info capability flags */
106#define LBMD_PI_CAP_INTEGRITY (1 << 0)
107#define LBMD_PI_CAP_REFTAG (1 << 1)
108
109/* Checksum types for Protection Information */
110#define LBMD_PI_CSUM_NONE 0
111#define LBMD_PI_CSUM_IP 1
112#define LBMD_PI_CSUM_CRC16_T10DIF 2
113#define LBMD_PI_CSUM_CRC64_NVME 4
114
115/* sizeof first published struct */
116#define LBMD_SIZE_VER0 16
117
118/*
119 * Logical block metadata capability descriptor
120 * If the device does not support metadata, all the fields will be zero.
121 * Applications must check lbmd_flags to determine whether metadata is
122 * supported or not.
123 */
124struct logical_block_metadata_cap {
125 /* Bitmask of logical block metadata capability flags */
126 __u32 lbmd_flags;
127 /*
128 * The amount of data described by each unit of logical block
129 * metadata
130 */
131 __u16 lbmd_interval;
132 /*
133 * Size in bytes of the logical block metadata associated with each
134 * interval
135 */
136 __u8 lbmd_size;
137 /*
138 * Size in bytes of the opaque block tag associated with each
139 * interval
140 */
141 __u8 lbmd_opaque_size;
142 /*
143 * Offset in bytes of the opaque block tag within the logical block
144 * metadata
145 */
146 __u8 lbmd_opaque_offset;
147 /* Size in bytes of the T10 PI tuple associated with each interval */
148 __u8 lbmd_pi_size;
149 /* Offset in bytes of T10 PI tuple within the logical block metadata */
150 __u8 lbmd_pi_offset;
151 /* T10 PI guard tag type */
152 __u8 lbmd_guard_tag_type;
153 /* Size in bytes of the T10 PI application tag */
154 __u8 lbmd_app_tag_size;
155 /* Size in bytes of the T10 PI reference tag */
156 __u8 lbmd_ref_tag_size;
157 /* Size in bytes of the T10 PI storage tag */
158 __u8 lbmd_storage_tag_size;
159 __u8 pad;
160};
161
162/* extent-same (dedupe) ioctls; these MUST match the btrfs ioctl definitions */
163#define FILE_DEDUPE_RANGE_SAME 0
164#define FILE_DEDUPE_RANGE_DIFFERS 1
165
166/* from struct btrfs_ioctl_file_extent_same_info */
167struct file_dedupe_range_info {
168 __s64 dest_fd; /* in - destination file */
169 __u64 dest_offset; /* in - start of extent in destination */
170 __u64 bytes_deduped; /* out - total # of bytes we were able
171 * to dedupe from this file. */
172 /* status of this dedupe operation:
173 * < 0 for error
174 * == FILE_DEDUPE_RANGE_SAME if dedupe succeeds
175 * == FILE_DEDUPE_RANGE_DIFFERS if data differs
176 */
177 __s32 status; /* out - see above description */
178 __u32 reserved; /* must be zero */
179};
180
181/* from struct btrfs_ioctl_file_extent_same_args */
182struct file_dedupe_range {
183 __u64 src_offset; /* in - start of extent in source */
184 __u64 src_length; /* in - length of extent */
185 __u16 dest_count; /* in - total elements in info array */
186 __u16 reserved1; /* must be zero */
187 __u32 reserved2; /* must be zero */
188 struct file_dedupe_range_info info[];
189};
190
191/* And dynamically-tunable limits and defaults: */
192struct files_stat_struct {
193 unsigned long nr_files; /* read only */
194 unsigned long nr_free_files; /* read only */
195 unsigned long max_files; /* tunable */
196};
197
198struct inodes_stat_t {
199 long nr_inodes;
200 long nr_unused;
201 long dummy[5]; /* padding for sysctl ABI compatibility */
202};
203
204
205#define NR_FILE 8192 /* this can well be larger on a larger system */
206
207/*
208 * Structure for FS_IOC_FSGETXATTR[A] and FS_IOC_FSSETXATTR.
209 */
210struct fsxattr {
211 __u32 fsx_xflags; /* xflags field value (get/set) */
212 __u32 fsx_extsize; /* extsize field value (get/set)*/
213 __u32 fsx_nextents; /* nextents field value (get) */
214 __u32 fsx_projid; /* project identifier (get/set) */
215 __u32 fsx_cowextsize; /* CoW extsize field value (get/set)*/
216 unsigned char fsx_pad[8];
217};
218
219/*
220 * Variable size structure for file_[sg]et_attr().
221 *
222 * Note. This is alternative to the structure 'struct file_kattr'/'struct fsxattr'.
223 * As this structure is passed to/from userspace with its size, this can
224 * be versioned based on the size.
225 */
226struct file_attr {
227 __u64 fa_xflags; /* xflags field value (get/set) */
228 __u32 fa_extsize; /* extsize field value (get/set)*/
229 __u32 fa_nextents; /* nextents field value (get) */
230 __u32 fa_projid; /* project identifier (get/set) */
231 __u32 fa_cowextsize; /* CoW extsize field value (get/set) */
232};
233
234#define FILE_ATTR_SIZE_VER0 24
235#define FILE_ATTR_SIZE_LATEST FILE_ATTR_SIZE_VER0
236
237/*
238 * Flags for the fsx_xflags field
239 */
240#define FS_XFLAG_REALTIME 0x00000001 /* data in realtime volume */
241#define FS_XFLAG_PREALLOC 0x00000002 /* preallocated file extents */
242#define FS_XFLAG_IMMUTABLE 0x00000008 /* file cannot be modified */
243#define FS_XFLAG_APPEND 0x00000010 /* all writes append */
244#define FS_XFLAG_SYNC 0x00000020 /* all writes synchronous */
245#define FS_XFLAG_NOATIME 0x00000040 /* do not update access time */
246#define FS_XFLAG_NODUMP 0x00000080 /* do not include in backups */
247#define FS_XFLAG_RTINHERIT 0x00000100 /* create with rt bit set */
248#define FS_XFLAG_PROJINHERIT 0x00000200 /* create with parents projid */
249#define FS_XFLAG_NOSYMLINKS 0x00000400 /* disallow symlink creation */
250#define FS_XFLAG_EXTSIZE 0x00000800 /* extent size allocator hint */
251#define FS_XFLAG_EXTSZINHERIT 0x00001000 /* inherit inode extent size */
252#define FS_XFLAG_NODEFRAG 0x00002000 /* do not defragment */
253#define FS_XFLAG_FILESTREAM 0x00004000 /* use filestream allocator */
254#define FS_XFLAG_DAX 0x00008000 /* use DAX for IO */
255#define FS_XFLAG_COWEXTSIZE 0x00010000 /* CoW extent size allocator hint */
256#define FS_XFLAG_HASATTR 0x80000000 /* no DIFLAG for this */
257
258/* the read-only stuff doesn't really belong here, but any other place is
259 probably as bad and I don't want to create yet another include file. */
260
261#define BLKROSET _IO(0x12,93) /* set device read-only (0 = read-write) */
262#define BLKROGET _IO(0x12,94) /* get read-only status (0 = read_write) */
263#define BLKRRPART _IO(0x12,95) /* re-read partition table */
264#define BLKGETSIZE _IO(0x12,96) /* return device size /512 (long *arg) */
265#define BLKFLSBUF _IO(0x12,97) /* flush buffer cache */
266#define BLKRASET _IO(0x12,98) /* set read ahead for block device */
267#define BLKRAGET _IO(0x12,99) /* get current read ahead setting */
268#define BLKFRASET _IO(0x12,100)/* set filesystem (mm/filemap.c) read-ahead */
269#define BLKFRAGET _IO(0x12,101)/* get filesystem (mm/filemap.c) read-ahead */
270#define BLKSECTSET _IO(0x12,102)/* set max sectors per request (ll_rw_blk.c) */
271#define BLKSECTGET _IO(0x12,103)/* get max sectors per request (ll_rw_blk.c) */
272#define BLKSSZGET _IO(0x12,104)/* get block device sector size */
273#if 0
274#define BLKPG _IO(0x12,105)/* See blkpg.h */
275
276/* Some people are morons. Do not use sizeof! */
277
278#define BLKELVGET _IOR(0x12,106,size_t)/* elevator get */
279#define BLKELVSET _IOW(0x12,107,size_t)/* elevator set */
280/* This was here just to show that the number is taken -
281 probably all these _IO(0x12,*) ioctls should be moved to blkpg.h. */
282#endif
283/* A jump here: 108-111 have been used for various private purposes. */
284#define BLKBSZGET _IOR(0x12,112,size_t)
285#define BLKBSZSET _IOW(0x12,113,size_t)
286#define BLKGETSIZE64 _IOR(0x12,114,size_t) /* return device size in bytes (u64 *arg) */
287#define BLKTRACESETUP _IOWR(0x12,115,struct blk_user_trace_setup)
288#define BLKTRACESTART _IO(0x12,116)
289#define BLKTRACESTOP _IO(0x12,117)
290#define BLKTRACETEARDOWN _IO(0x12,118)
291#define BLKDISCARD _IO(0x12,119)
292#define BLKIOMIN _IO(0x12,120)
293#define BLKIOOPT _IO(0x12,121)
294#define BLKALIGNOFF _IO(0x12,122)
295#define BLKPBSZGET _IO(0x12,123)
296#define BLKDISCARDZEROES _IO(0x12,124)
297#define BLKSECDISCARD _IO(0x12,125)
298#define BLKROTATIONAL _IO(0x12,126)
299#define BLKZEROOUT _IO(0x12,127)
300#define BLKGETDISKSEQ _IOR(0x12,128,__u64)
301/* 130-136 are used by zoned block device ioctls (uapi/linux/blkzoned.h) */
302/* 137-141 are used by blk-crypto ioctls (uapi/linux/blk-crypto.h) */
303
304#define BMAP_IOCTL 1 /* obsolete - kept for compatibility */
305#define FIBMAP _IO(0x00,1) /* bmap access */
306#define FIGETBSZ _IO(0x00,2) /* get the block size used for bmap */
307#define FIFREEZE _IOWR('X', 119, int) /* Freeze */
308#define FITHAW _IOWR('X', 120, int) /* Thaw */
309#define FITRIM _IOWR('X', 121, struct fstrim_range) /* Trim */
310#define FICLONE _IOW(0x94, 9, int)
311#define FICLONERANGE _IOW(0x94, 13, struct file_clone_range)
312#define FIDEDUPERANGE _IOWR(0x94, 54, struct file_dedupe_range)
313
314#define FSLABEL_MAX 256 /* Max chars for the interface; each fs may differ */
315
316#define FS_IOC_GETFLAGS _IOR('f', 1, long)
317#define FS_IOC_SETFLAGS _IOW('f', 2, long)
318#define FS_IOC_GETVERSION _IOR('v', 1, long)
319#define FS_IOC_SETVERSION _IOW('v', 2, long)
320#define FS_IOC_FIEMAP _IOWR('f', 11, struct fiemap)
321#define FS_IOC32_GETFLAGS _IOR('f', 1, int)
322#define FS_IOC32_SETFLAGS _IOW('f', 2, int)
323#define FS_IOC32_GETVERSION _IOR('v', 1, int)
324#define FS_IOC32_SETVERSION _IOW('v', 2, int)
325#define FS_IOC_FSGETXATTR _IOR('X', 31, struct fsxattr)
326#define FS_IOC_FSSETXATTR _IOW('X', 32, struct fsxattr)
327#define FS_IOC_GETFSLABEL _IOR(0x94, 49, char[FSLABEL_MAX])
328#define FS_IOC_SETFSLABEL _IOW(0x94, 50, char[FSLABEL_MAX])
329/* Returns the external filesystem UUID, the same one blkid returns */
330#define FS_IOC_GETFSUUID _IOR(0x15, 0, struct fsuuid2)
331/*
332 * Returns the path component under /sys/fs/ that refers to this filesystem;
333 * also /sys/kernel/debug/ for filesystems with debugfs exports
334 */
335#define FS_IOC_GETFSSYSFSPATH _IOR(0x15, 1, struct fs_sysfs_path)
336/* Get logical block metadata capability details */
337#define FS_IOC_GETLBMD_CAP _IOWR(0x15, 2, struct logical_block_metadata_cap)
338
339/*
340 * Inode flags (FS_IOC_GETFLAGS / FS_IOC_SETFLAGS)
341 *
342 * Note: for historical reasons, these flags were originally used and
343 * defined for use by ext2/ext3, and then other file systems started
344 * using these flags so they wouldn't need to write their own version
345 * of chattr/lsattr (which was shipped as part of e2fsprogs). You
346 * should think twice before trying to use these flags in new
347 * contexts, or trying to assign these flags, since they are used both
348 * as the UAPI and the on-disk encoding for ext2/3/4. Also, we are
349 * almost out of 32-bit flags. :-)
350 *
351 * We have recently hoisted FS_IOC_FSGETXATTR / FS_IOC_FSSETXATTR from
352 * XFS to the generic FS level interface. This uses a structure that
353 * has padding and hence has more room to grow, so it may be more
354 * appropriate for many new use cases.
355 *
356 * Please do not change these flags or interfaces before checking with
357 * linux-fsdevel@vger.kernel.org and linux-api@vger.kernel.org.
358 */
359#define FS_SECRM_FL 0x00000001 /* Secure deletion */
360#define FS_UNRM_FL 0x00000002 /* Undelete */
361#define FS_COMPR_FL 0x00000004 /* Compress file */
362#define FS_SYNC_FL 0x00000008 /* Synchronous updates */
363#define FS_IMMUTABLE_FL 0x00000010 /* Immutable file */
364#define FS_APPEND_FL 0x00000020 /* writes to file may only append */
365#define FS_NODUMP_FL 0x00000040 /* do not dump file */
366#define FS_NOATIME_FL 0x00000080 /* do not update atime */
367/* Reserved for compression usage... */
368#define FS_DIRTY_FL 0x00000100
369#define FS_COMPRBLK_FL 0x00000200 /* One or more compressed clusters */
370#define FS_NOCOMP_FL 0x00000400 /* Don't compress */
371/* End compression flags --- maybe not all used */
372#define FS_ENCRYPT_FL 0x00000800 /* Encrypted file */
373#define FS_BTREE_FL 0x00001000 /* btree format dir */
374#define FS_INDEX_FL 0x00001000 /* hash-indexed directory */
375#define FS_IMAGIC_FL 0x00002000 /* AFS directory */
376#define FS_JOURNAL_DATA_FL 0x00004000 /* Reserved for ext3 */
377#define FS_NOTAIL_FL 0x00008000 /* file tail should not be merged */
378#define FS_DIRSYNC_FL 0x00010000 /* dirsync behaviour (directories only) */
379#define FS_TOPDIR_FL 0x00020000 /* Top of directory hierarchies*/
380#define FS_HUGE_FILE_FL 0x00040000 /* Reserved for ext4 */
381#define FS_EXTENT_FL 0x00080000 /* Extents */
382#define FS_VERITY_FL 0x00100000 /* Verity protected inode */
383#define FS_EA_INODE_FL 0x00200000 /* Inode used for large EA */
384#define FS_EOFBLOCKS_FL 0x00400000 /* Reserved for ext4 */
385#define FS_NOCOW_FL 0x00800000 /* Do not cow file */
386#define FS_DAX_FL 0x02000000 /* Inode is DAX */
387#define FS_INLINE_DATA_FL 0x10000000 /* Reserved for ext4 */
388#define FS_PROJINHERIT_FL 0x20000000 /* Create with parents projid */
389#define FS_CASEFOLD_FL 0x40000000 /* Folder is case insensitive */
390#define FS_RESERVED_FL 0x80000000 /* reserved for ext2 lib */
391
392#define FS_FL_USER_VISIBLE 0x0003DFFF /* User visible flags */
393#define FS_FL_USER_MODIFIABLE 0x000380FF /* User modifiable flags */
394
395
396#define SYNC_FILE_RANGE_WAIT_BEFORE 1
397#define SYNC_FILE_RANGE_WRITE 2
398#define SYNC_FILE_RANGE_WAIT_AFTER 4
399#define SYNC_FILE_RANGE_WRITE_AND_WAIT (SYNC_FILE_RANGE_WRITE | \
400 SYNC_FILE_RANGE_WAIT_BEFORE | \
401 SYNC_FILE_RANGE_WAIT_AFTER)
402
403/*
404 * Flags for preadv2/pwritev2:
405 */
406
407typedef int __bitwise __kernel_rwf_t;
408
409/* high priority request, poll if possible */
410#define RWF_HIPRI ((__force __kernel_rwf_t)0x00000001)
411
412/* per-IO O_DSYNC */
413#define RWF_DSYNC ((__force __kernel_rwf_t)0x00000002)
414
415/* per-IO O_SYNC */
416#define RWF_SYNC ((__force __kernel_rwf_t)0x00000004)
417
418/* per-IO, return -EAGAIN if operation would block */
419#define RWF_NOWAIT ((__force __kernel_rwf_t)0x00000008)
420
421/* per-IO O_APPEND */
422#define RWF_APPEND ((__force __kernel_rwf_t)0x00000010)
423
424/* per-IO negation of O_APPEND */
425#define RWF_NOAPPEND ((__force __kernel_rwf_t)0x00000020)
426
427/* Atomic Write */
428#define RWF_ATOMIC ((__force __kernel_rwf_t)0x00000040)
429
430/* buffered IO that drops the cache after reading or writing data */
431#define RWF_DONTCACHE ((__force __kernel_rwf_t)0x00000080)
432
433/* prevent pipe and socket writes from raising SIGPIPE */
434#define RWF_NOSIGNAL ((__force __kernel_rwf_t)0x00000100)
435
436/* mask of flags supported by the kernel */
437#define RWF_SUPPORTED (RWF_HIPRI | RWF_DSYNC | RWF_SYNC | RWF_NOWAIT |\
438 RWF_APPEND | RWF_NOAPPEND | RWF_ATOMIC |\
439 RWF_DONTCACHE | RWF_NOSIGNAL)
440
441#define PROCFS_IOCTL_MAGIC 'f'
442
443/* Pagemap ioctl */
444#define PAGEMAP_SCAN _IOWR(PROCFS_IOCTL_MAGIC, 16, struct pm_scan_arg)
445
446/* Bitmasks provided in pm_scan_args masks and reported in page_region.categories. */
447#define PAGE_IS_WPALLOWED (1 << 0)
448#define PAGE_IS_WRITTEN (1 << 1)
449#define PAGE_IS_FILE (1 << 2)
450#define PAGE_IS_PRESENT (1 << 3)
451#define PAGE_IS_SWAPPED (1 << 4)
452#define PAGE_IS_PFNZERO (1 << 5)
453#define PAGE_IS_HUGE (1 << 6)
454#define PAGE_IS_SOFT_DIRTY (1 << 7)
455#define PAGE_IS_GUARD (1 << 8)
456
457/*
458 * struct page_region - Page region with flags
459 * @start: Start of the region
460 * @end: End of the region (exclusive)
461 * @categories: PAGE_IS_* category bitmask for the region
462 */
463struct page_region {
464 __u64 start;
465 __u64 end;
466 __u64 categories;
467};
468
469/* Flags for PAGEMAP_SCAN ioctl */
470#define PM_SCAN_WP_MATCHING (1 << 0) /* Write protect the pages matched. */
471#define PM_SCAN_CHECK_WPASYNC (1 << 1) /* Abort the scan when a non-WP-enabled page is found. */
472
473/*
474 * struct pm_scan_arg - Pagemap ioctl argument
475 * @size: Size of the structure
476 * @flags: Flags for the IOCTL
477 * @start: Starting address of the region
478 * @end: Ending address of the region
479 * @walk_end Address where the scan stopped (written by kernel).
480 * walk_end == end (address tags cleared) informs that the scan completed on entire range.
481 * @vec: Address of page_region struct array for output
482 * @vec_len: Length of the page_region struct array
483 * @max_pages: Optional limit for number of returned pages (0 = disabled)
484 * @category_inverted: PAGE_IS_* categories which values match if 0 instead of 1
485 * @category_mask: Skip pages for which any category doesn't match
486 * @category_anyof_mask: Skip pages for which no category matches
487 * @return_mask: PAGE_IS_* categories that are to be reported in `page_region`s returned
488 */
489struct pm_scan_arg {
490 __u64 size;
491 __u64 flags;
492 __u64 start;
493 __u64 end;
494 __u64 walk_end;
495 __u64 vec;
496 __u64 vec_len;
497 __u64 max_pages;
498 __u64 category_inverted;
499 __u64 category_mask;
500 __u64 category_anyof_mask;
501 __u64 return_mask;
502};
503
504/* /proc/<pid>/maps ioctl */
505#define PROCMAP_QUERY _IOWR(PROCFS_IOCTL_MAGIC, 17, struct procmap_query)
506
507enum procmap_query_flags {
508 /*
509 * VMA permission flags.
510 *
511 * Can be used as part of procmap_query.query_flags field to look up
512 * only VMAs satisfying specified subset of permissions. E.g., specifying
513 * PROCMAP_QUERY_VMA_READABLE only will return both readable and read/write VMAs,
514 * while having PROCMAP_QUERY_VMA_READABLE | PROCMAP_QUERY_VMA_WRITABLE will only
515 * return read/write VMAs, though both executable/non-executable and
516 * private/shared will be ignored.
517 *
518 * PROCMAP_QUERY_VMA_* flags are also returned in procmap_query.vma_flags
519 * field to specify actual VMA permissions.
520 */
521 PROCMAP_QUERY_VMA_READABLE = 0x01,
522 PROCMAP_QUERY_VMA_WRITABLE = 0x02,
523 PROCMAP_QUERY_VMA_EXECUTABLE = 0x04,
524 PROCMAP_QUERY_VMA_SHARED = 0x08,
525 /*
526 * Query modifier flags.
527 *
528 * By default VMA that covers provided address is returned, or -ENOENT
529 * is returned. With PROCMAP_QUERY_COVERING_OR_NEXT_VMA flag set, closest
530 * VMA with vma_start > addr will be returned if no covering VMA is
531 * found.
532 *
533 * PROCMAP_QUERY_FILE_BACKED_VMA instructs query to consider only VMAs that
534 * have file backing. Can be combined with PROCMAP_QUERY_COVERING_OR_NEXT_VMA
535 * to iterate all VMAs with file backing.
536 */
537 PROCMAP_QUERY_COVERING_OR_NEXT_VMA = 0x10,
538 PROCMAP_QUERY_FILE_BACKED_VMA = 0x20,
539};
540
541/*
542 * Input/output argument structured passed into ioctl() call. It can be used
543 * to query a set of VMAs (Virtual Memory Areas) of a process.
544 *
545 * Each field can be one of three kinds, marked in a short comment to the
546 * right of the field:
547 * - "in", input argument, user has to provide this value, kernel doesn't modify it;
548 * - "out", output argument, kernel sets this field with VMA data;
549 * - "in/out", input and output argument; user provides initial value (used
550 * to specify maximum allowable buffer size), and kernel sets it to actual
551 * amount of data written (or zero, if there is no data).
552 *
553 * If matching VMA is found (according to criterias specified by
554 * query_addr/query_flags, all the out fields are filled out, and ioctl()
555 * returns 0. If there is no matching VMA, -ENOENT will be returned.
556 * In case of any other error, negative error code other than -ENOENT is
557 * returned.
558 *
559 * Most of the data is similar to the one returned as text in /proc/<pid>/maps
560 * file, but procmap_query provides more querying flexibility. There are no
561 * consistency guarantees between subsequent ioctl() calls, but data returned
562 * for matched VMA is self-consistent.
563 */
564struct procmap_query {
565 /* Query struct size, for backwards/forward compatibility */
566 __u64 size;
567 /*
568 * Query flags, a combination of enum procmap_query_flags values.
569 * Defines query filtering and behavior, see enum procmap_query_flags.
570 *
571 * Input argument, provided by user. Kernel doesn't modify it.
572 */
573 __u64 query_flags; /* in */
574 /*
575 * Query address. By default, VMA that covers this address will
576 * be looked up. PROCMAP_QUERY_* flags above modify this default
577 * behavior further.
578 *
579 * Input argument, provided by user. Kernel doesn't modify it.
580 */
581 __u64 query_addr; /* in */
582 /* VMA starting (inclusive) and ending (exclusive) address, if VMA is found. */
583 __u64 vma_start; /* out */
584 __u64 vma_end; /* out */
585 /* VMA permissions flags. A combination of PROCMAP_QUERY_VMA_* flags. */
586 __u64 vma_flags; /* out */
587 /* VMA backing page size granularity. */
588 __u64 vma_page_size; /* out */
589 /*
590 * VMA file offset. If VMA has file backing, this specifies offset
591 * within the file that VMA's start address corresponds to.
592 * Is set to zero if VMA has no backing file.
593 */
594 __u64 vma_offset; /* out */
595 /* Backing file's inode number, or zero, if VMA has no backing file. */
596 __u64 inode; /* out */
597 /* Backing file's device major/minor number, or zero, if VMA has no backing file. */
598 __u32 dev_major; /* out */
599 __u32 dev_minor; /* out */
600 /*
601 * If set to non-zero value, signals the request to return VMA name
602 * (i.e., VMA's backing file's absolute path, with " (deleted)" suffix
603 * appended, if file was unlinked from FS) for matched VMA. VMA name
604 * can also be some special name (e.g., "[heap]", "[stack]") or could
605 * be even user-supplied with prctl(PR_SET_VMA, PR_SET_VMA_ANON_NAME).
606 *
607 * Kernel will set this field to zero, if VMA has no associated name.
608 * Otherwise kernel will return actual amount of bytes filled in
609 * user-supplied buffer (see vma_name_addr field below), including the
610 * terminating zero.
611 *
612 * If VMA name is longer that user-supplied maximum buffer size,
613 * -E2BIG error is returned.
614 *
615 * If this field is set to non-zero value, vma_name_addr should point
616 * to valid user space memory buffer of at least vma_name_size bytes.
617 * If set to zero, vma_name_addr should be set to zero as well
618 */
619 __u32 vma_name_size; /* in/out */
620 /*
621 * If set to non-zero value, signals the request to extract and return
622 * VMA's backing file's build ID, if the backing file is an ELF file
623 * and it contains embedded build ID.
624 *
625 * Kernel will set this field to zero, if VMA has no backing file,
626 * backing file is not an ELF file, or ELF file has no build ID
627 * embedded.
628 *
629 * Build ID is a binary value (not a string). Kernel will set
630 * build_id_size field to exact number of bytes used for build ID.
631 * If build ID is requested and present, but needs more bytes than
632 * user-supplied maximum buffer size (see build_id_addr field below),
633 * -E2BIG error will be returned.
634 *
635 * If this field is set to non-zero value, build_id_addr should point
636 * to valid user space memory buffer of at least build_id_size bytes.
637 * If set to zero, build_id_addr should be set to zero as well
638 */
639 __u32 build_id_size; /* in/out */
640 /*
641 * User-supplied address of a buffer of at least vma_name_size bytes
642 * for kernel to fill with matched VMA's name (see vma_name_size field
643 * description above for details).
644 *
645 * Should be set to zero if VMA name should not be returned.
646 */
647 __u64 vma_name_addr; /* in */
648 /*
649 * User-supplied address of a buffer of at least build_id_size bytes
650 * for kernel to fill with matched VMA's ELF build ID, if available
651 * (see build_id_size field description above for details).
652 *
653 * Should be set to zero if build ID should not be returned.
654 */
655 __u64 build_id_addr; /* in */
656};
657
658#endif /* _UAPI_LINUX_FS_H */
659