1// SPDX-License-Identifier: GPL-1.0+
2/*
3 * OHCI HCD (Host Controller Driver) for USB.
4 *
5 * (C) Copyright 1999 Roman Weissgaerber <weissg@vienna.at>
6 * (C) Copyright 2000-2004 David Brownell <dbrownell@users.sourceforge.net>
7 *
8 * This file is licenced under GPL
9 */
10
11/*-------------------------------------------------------------------------*/
12
13/*
14 * OHCI Root Hub ... the nonsharable stuff
15 */
16
17#define dbg_port(hc,label,num,value) \
18 ohci_dbg (hc, \
19 "%s roothub.portstatus [%d] " \
20 "= 0x%08x%s%s%s%s%s%s%s%s%s%s%s%s\n", \
21 label, num, value, \
22 (value & RH_PS_PRSC) ? " PRSC" : "", \
23 (value & RH_PS_OCIC) ? " OCIC" : "", \
24 (value & RH_PS_PSSC) ? " PSSC" : "", \
25 (value & RH_PS_PESC) ? " PESC" : "", \
26 (value & RH_PS_CSC) ? " CSC" : "", \
27 \
28 (value & RH_PS_LSDA) ? " LSDA" : "", \
29 (value & RH_PS_PPS) ? " PPS" : "", \
30 (value & RH_PS_PRS) ? " PRS" : "", \
31 (value & RH_PS_POCI) ? " POCI" : "", \
32 (value & RH_PS_PSS) ? " PSS" : "", \
33 \
34 (value & RH_PS_PES) ? " PES" : "", \
35 (value & RH_PS_CCS) ? " CCS" : "" \
36 );
37
38/*-------------------------------------------------------------------------*/
39
40#define OHCI_SCHED_ENABLES \
41 (OHCI_CTRL_CLE|OHCI_CTRL_BLE|OHCI_CTRL_PLE|OHCI_CTRL_IE)
42
43static void update_done_list(struct ohci_hcd *);
44static void ohci_work(struct ohci_hcd *);
45
46#ifdef CONFIG_PM
47static int ohci_rh_suspend (struct ohci_hcd *ohci, int autostop)
48__releases(ohci->lock)
49__acquires(ohci->lock)
50{
51 int status = 0;
52
53 ohci->hc_control = ohci_readl (ohci, &ohci->regs->control);
54 switch (ohci->hc_control & OHCI_CTRL_HCFS) {
55 case OHCI_USB_RESUME:
56 ohci_dbg (ohci, "resume/suspend?\n");
57 ohci->hc_control &= ~OHCI_CTRL_HCFS;
58 ohci->hc_control |= OHCI_USB_RESET;
59 ohci_writel (ohci, ohci->hc_control, &ohci->regs->control);
60 (void) ohci_readl (ohci, &ohci->regs->control);
61 fallthrough;
62 case OHCI_USB_RESET:
63 status = -EBUSY;
64 ohci_dbg (ohci, "needs reinit!\n");
65 goto done;
66 case OHCI_USB_SUSPEND:
67 if (!ohci->autostop) {
68 ohci_dbg (ohci, "already suspended\n");
69 goto done;
70 }
71 }
72 ohci_dbg (ohci, "%s root hub\n",
73 autostop ? "auto-stop" : "suspend");
74
75 /* First stop any processing */
76 if (!autostop && (ohci->hc_control & OHCI_SCHED_ENABLES)) {
77 ohci->hc_control &= ~OHCI_SCHED_ENABLES;
78 ohci_writel (ohci, ohci->hc_control, &ohci->regs->control);
79 ohci->hc_control = ohci_readl (ohci, &ohci->regs->control);
80 ohci_writel (ohci, OHCI_INTR_SF, &ohci->regs->intrstatus);
81
82 /* sched disables take effect on the next frame,
83 * then the last WDH could take 6+ msec
84 */
85 ohci_dbg (ohci, "stopping schedules ...\n");
86 ohci->autostop = 0;
87 spin_unlock_irq (lock: &ohci->lock);
88 msleep (msecs: 8);
89 spin_lock_irq (lock: &ohci->lock);
90 }
91 update_done_list(ohci);
92 ohci_work(ohci);
93
94 /* All ED unlinks should be finished, no need for SOF interrupts */
95 ohci_writel(ohci, OHCI_INTR_SF, &ohci->regs->intrdisable);
96
97 /*
98 * Some controllers don't handle "global" suspend properly if
99 * there are unsuspended ports. For these controllers, put all
100 * the enabled ports into suspend before suspending the root hub.
101 */
102 if (ohci->flags & OHCI_QUIRK_GLOBAL_SUSPEND) {
103 __hc32 __iomem *portstat = ohci->regs->roothub.portstatus;
104 int i;
105 unsigned temp;
106
107 for (i = 0; i < ohci->num_ports; (++i, ++portstat)) {
108 temp = ohci_readl(ohci, portstat);
109 if ((temp & (RH_PS_PES | RH_PS_PSS)) ==
110 RH_PS_PES)
111 ohci_writel(ohci, RH_PS_PSS, portstat);
112 }
113 }
114
115 /* maybe resume can wake root hub */
116 if (ohci_to_hcd(ohci)->self.root_hub->do_remote_wakeup || autostop) {
117 ohci->hc_control |= OHCI_CTRL_RWE;
118 } else {
119 ohci_writel(ohci, OHCI_INTR_RHSC | OHCI_INTR_RD,
120 &ohci->regs->intrdisable);
121 ohci->hc_control &= ~OHCI_CTRL_RWE;
122 }
123
124 /* Suspend hub ... this is the "global (to this bus) suspend" mode,
125 * which doesn't imply ports will first be individually suspended.
126 */
127 ohci->hc_control &= ~OHCI_CTRL_HCFS;
128 ohci->hc_control |= OHCI_USB_SUSPEND;
129 ohci_writel (ohci, ohci->hc_control, &ohci->regs->control);
130 (void) ohci_readl (ohci, &ohci->regs->control);
131
132 /* no resumes until devices finish suspending */
133 if (!autostop) {
134 ohci->next_statechange = jiffies + msecs_to_jiffies (m: 5);
135 ohci->autostop = 0;
136 ohci->rh_state = OHCI_RH_SUSPENDED;
137 }
138
139done:
140 return status;
141}
142
143static inline struct ed *find_head (struct ed *ed)
144{
145 /* for bulk and control lists */
146 while (ed->ed_prev)
147 ed = ed->ed_prev;
148 return ed;
149}
150
151/* caller has locked the root hub */
152static int ohci_rh_resume (struct ohci_hcd *ohci)
153__releases(ohci->lock)
154__acquires(ohci->lock)
155{
156 struct usb_hcd *hcd = ohci_to_hcd (ohci);
157 u32 temp, enables;
158 int status = -EINPROGRESS;
159 int autostopped = ohci->autostop;
160
161 ohci->autostop = 0;
162 ohci->hc_control = ohci_readl (ohci, &ohci->regs->control);
163
164 if (ohci->hc_control & (OHCI_CTRL_IR | OHCI_SCHED_ENABLES)) {
165 /* this can happen after resuming a swsusp snapshot */
166 if (ohci->rh_state != OHCI_RH_RUNNING) {
167 ohci_dbg (ohci, "BIOS/SMM active, control %03x\n",
168 ohci->hc_control);
169 status = -EBUSY;
170 /* this happens when pmcore resumes HC then root */
171 } else {
172 ohci_dbg (ohci, "duplicate resume\n");
173 status = 0;
174 }
175 } else switch (ohci->hc_control & OHCI_CTRL_HCFS) {
176 case OHCI_USB_SUSPEND:
177 ohci->hc_control &= ~(OHCI_CTRL_HCFS|OHCI_SCHED_ENABLES);
178 ohci->hc_control |= OHCI_USB_RESUME;
179 ohci_writel (ohci, ohci->hc_control, &ohci->regs->control);
180 (void) ohci_readl (ohci, &ohci->regs->control);
181 ohci_dbg (ohci, "%s root hub\n",
182 autostopped ? "auto-start" : "resume");
183 break;
184 case OHCI_USB_RESUME:
185 /* HCFS changes sometime after INTR_RD */
186 ohci_dbg(ohci, "%swakeup root hub\n",
187 autostopped ? "auto-" : "");
188 break;
189 case OHCI_USB_OPER:
190 /* this can happen after resuming a swsusp snapshot */
191 ohci_dbg (ohci, "snapshot resume? reinit\n");
192 status = -EBUSY;
193 break;
194 default: /* RESET, we lost power */
195 ohci_dbg (ohci, "lost power\n");
196 status = -EBUSY;
197 }
198 if (status == -EBUSY) {
199 if (!autostopped) {
200 spin_unlock_irq (lock: &ohci->lock);
201 status = ohci_restart (ohci);
202
203 usb_root_hub_lost_power(rhdev: hcd->self.root_hub);
204
205 spin_lock_irq (lock: &ohci->lock);
206 }
207 return status;
208 }
209 if (status != -EINPROGRESS)
210 return status;
211 if (autostopped)
212 goto skip_resume;
213 spin_unlock_irq (lock: &ohci->lock);
214
215 /* Some controllers (lucent erratum) need extra-long delays */
216 msleep (msecs: 20 /* usb 11.5.1.10 */ + 12 /* 32 msec counter */ + 1);
217
218 temp = ohci_readl (ohci, &ohci->regs->control);
219 temp &= OHCI_CTRL_HCFS;
220 if (temp != OHCI_USB_RESUME) {
221 ohci_err (ohci, "controller won't resume\n");
222 spin_lock_irq(lock: &ohci->lock);
223 return -EBUSY;
224 }
225
226 /* disable old schedule state, reinit from scratch */
227 ohci_writel (ohci, 0, &ohci->regs->ed_controlhead);
228 ohci_writel (ohci, 0, &ohci->regs->ed_controlcurrent);
229 ohci_writel (ohci, 0, &ohci->regs->ed_bulkhead);
230 ohci_writel (ohci, 0, &ohci->regs->ed_bulkcurrent);
231 ohci_writel (ohci, 0, &ohci->regs->ed_periodcurrent);
232 ohci_writel (ohci, (u32) ohci->hcca_dma, &ohci->regs->hcca);
233
234 /* Sometimes PCI D3 suspend trashes frame timings ... */
235 periodic_reinit (ohci);
236
237 /*
238 * The following code is executed with ohci->lock held and
239 * irqs disabled if and only if autostopped is true. This
240 * will cause sparse to warn about a "context imbalance".
241 */
242skip_resume:
243 /* interrupts might have been disabled */
244 ohci_writel (ohci, OHCI_INTR_INIT, &ohci->regs->intrenable);
245 if (ohci->ed_rm_list)
246 ohci_writel (ohci, OHCI_INTR_SF, &ohci->regs->intrenable);
247
248 /* Then re-enable operations */
249 ohci_writel (ohci, OHCI_USB_OPER, &ohci->regs->control);
250 (void) ohci_readl (ohci, &ohci->regs->control);
251 if (!autostopped)
252 msleep (msecs: 3);
253
254 temp = ohci->hc_control;
255 temp &= OHCI_CTRL_RWC;
256 temp |= OHCI_CONTROL_INIT | OHCI_USB_OPER;
257 ohci->hc_control = temp;
258 ohci_writel (ohci, temp, &ohci->regs->control);
259 (void) ohci_readl (ohci, &ohci->regs->control);
260
261 /* TRSMRCY */
262 if (!autostopped) {
263 msleep (msecs: 10);
264 spin_lock_irq (lock: &ohci->lock);
265 }
266 /* now ohci->lock is always held and irqs are always disabled */
267
268 /* keep it alive for more than ~5x suspend + resume costs */
269 ohci->next_statechange = jiffies + STATECHANGE_DELAY;
270
271 /* maybe turn schedules back on */
272 enables = 0;
273 temp = 0;
274 if (!ohci->ed_rm_list) {
275 if (ohci->ed_controltail) {
276 ohci_writel (ohci,
277 find_head (ohci->ed_controltail)->dma,
278 &ohci->regs->ed_controlhead);
279 enables |= OHCI_CTRL_CLE;
280 temp |= OHCI_CLF;
281 }
282 if (ohci->ed_bulktail) {
283 ohci_writel (ohci, find_head (ohci->ed_bulktail)->dma,
284 &ohci->regs->ed_bulkhead);
285 enables |= OHCI_CTRL_BLE;
286 temp |= OHCI_BLF;
287 }
288 }
289 if (hcd->self.bandwidth_isoc_reqs || hcd->self.bandwidth_int_reqs)
290 enables |= OHCI_CTRL_PLE|OHCI_CTRL_IE;
291 if (enables) {
292 ohci_dbg (ohci, "restarting schedules ... %08x\n", enables);
293 ohci->hc_control |= enables;
294 ohci_writel (ohci, ohci->hc_control, &ohci->regs->control);
295 if (temp)
296 ohci_writel (ohci, temp, &ohci->regs->cmdstatus);
297 (void) ohci_readl (ohci, &ohci->regs->control);
298 }
299
300 ohci->rh_state = OHCI_RH_RUNNING;
301 return 0;
302}
303
304static int ohci_bus_suspend (struct usb_hcd *hcd)
305{
306 struct ohci_hcd *ohci = hcd_to_ohci (hcd);
307 int rc;
308
309 spin_lock_irq (lock: &ohci->lock);
310
311 if (unlikely(!HCD_HW_ACCESSIBLE(hcd)))
312 rc = -ESHUTDOWN;
313 else
314 rc = ohci_rh_suspend (ohci, autostop: 0);
315 spin_unlock_irq (lock: &ohci->lock);
316
317 if (rc == 0) {
318 timer_delete_sync(timer: &ohci->io_watchdog);
319 ohci->prev_frame_no = IO_WATCHDOG_OFF;
320 }
321 return rc;
322}
323
324static int ohci_bus_resume (struct usb_hcd *hcd)
325{
326 struct ohci_hcd *ohci = hcd_to_ohci (hcd);
327 int rc;
328
329 if (time_before (jiffies, ohci->next_statechange))
330 msleep(msecs: 5);
331
332 spin_lock_irq (lock: &ohci->lock);
333
334 if (unlikely(!HCD_HW_ACCESSIBLE(hcd)))
335 rc = -ESHUTDOWN;
336 else
337 rc = ohci_rh_resume (ohci);
338 spin_unlock_irq (lock: &ohci->lock);
339
340 /* poll until we know a device is connected or we autostop */
341 if (rc == 0)
342 usb_hcd_poll_rh_status(hcd);
343 return rc;
344}
345
346/* Carry out polling-, autostop-, and autoresume-related state changes */
347static int ohci_root_hub_state_changes(struct ohci_hcd *ohci, int changed,
348 int any_connected, int rhsc_status)
349{
350 int poll_rh = 1;
351 int rhsc_enable;
352
353 /* Some broken controllers never turn off RHSC in the interrupt
354 * status register. For their sake we won't re-enable RHSC
355 * interrupts if the interrupt bit is already active.
356 */
357 rhsc_enable = ohci_readl(ohci, &ohci->regs->intrenable) &
358 OHCI_INTR_RHSC;
359
360 switch (ohci->hc_control & OHCI_CTRL_HCFS) {
361 case OHCI_USB_OPER:
362 /* If no status changes are pending, enable RHSC interrupts. */
363 if (!rhsc_enable && !rhsc_status && !changed) {
364 rhsc_enable = OHCI_INTR_RHSC;
365 ohci_writel(ohci, rhsc_enable, &ohci->regs->intrenable);
366 }
367
368 /* Keep on polling until we know a device is connected
369 * and RHSC is enabled, or until we autostop.
370 */
371 if (!ohci->autostop) {
372 if (any_connected ||
373 !device_may_wakeup(dev: &ohci_to_hcd(ohci)
374 ->self.root_hub->dev)) {
375 if (rhsc_enable)
376 poll_rh = 0;
377 } else {
378 ohci->autostop = 1;
379 ohci->next_statechange = jiffies + HZ;
380 }
381
382 /* if no devices have been attached for one second, autostop */
383 } else {
384 if (changed || any_connected) {
385 ohci->autostop = 0;
386 ohci->next_statechange = jiffies +
387 STATECHANGE_DELAY;
388 } else if (time_after_eq(jiffies,
389 ohci->next_statechange)
390 && !ohci->ed_rm_list
391 && !(ohci->hc_control &
392 OHCI_SCHED_ENABLES)) {
393 ohci_rh_suspend(ohci, autostop: 1);
394 if (rhsc_enable)
395 poll_rh = 0;
396 }
397 }
398 break;
399
400 case OHCI_USB_SUSPEND:
401 case OHCI_USB_RESUME:
402 /* if there is a port change, autostart or ask to be resumed */
403 if (changed) {
404 if (ohci->autostop)
405 ohci_rh_resume(ohci);
406 else
407 usb_hcd_resume_root_hub(hcd: ohci_to_hcd(ohci));
408
409 /* If remote wakeup is disabled, stop polling */
410 } else if (!ohci->autostop &&
411 !ohci_to_hcd(ohci)->self.root_hub->
412 do_remote_wakeup) {
413 poll_rh = 0;
414
415 } else {
416 /* If no status changes are pending,
417 * enable RHSC interrupts
418 */
419 if (!rhsc_enable && !rhsc_status) {
420 rhsc_enable = OHCI_INTR_RHSC;
421 ohci_writel(ohci, rhsc_enable,
422 &ohci->regs->intrenable);
423 }
424 /* Keep polling until RHSC is enabled */
425 if (rhsc_enable)
426 poll_rh = 0;
427 }
428 break;
429 }
430 return poll_rh;
431}
432
433#else /* CONFIG_PM */
434
435static inline int ohci_rh_resume(struct ohci_hcd *ohci)
436{
437 return 0;
438}
439
440/* Carry out polling-related state changes.
441 * autostop isn't used when CONFIG_PM is turned off.
442 */
443static int ohci_root_hub_state_changes(struct ohci_hcd *ohci, int changed,
444 int any_connected, int rhsc_status)
445{
446 /* If RHSC is enabled, don't poll */
447 if (ohci_readl(ohci, &ohci->regs->intrenable) & OHCI_INTR_RHSC)
448 return 0;
449
450 /* If status changes are pending, continue polling.
451 * Conversely, if no status changes are pending but the RHSC
452 * status bit was set, then RHSC may be broken so continue polling.
453 */
454 if (changed || rhsc_status)
455 return 1;
456
457 /* It's safe to re-enable RHSC interrupts */
458 ohci_writel(ohci, OHCI_INTR_RHSC, &ohci->regs->intrenable);
459 return 0;
460}
461
462#endif /* CONFIG_PM */
463
464/*-------------------------------------------------------------------------*/
465
466/* build "status change" packet (one or two bytes) from HC registers */
467
468int ohci_hub_status_data(struct usb_hcd *hcd, char *buf)
469{
470 struct ohci_hcd *ohci = hcd_to_ohci (hcd);
471 int i, changed = 0, length = 1;
472 int any_connected = 0;
473 int rhsc_status;
474 unsigned long flags;
475
476 spin_lock_irqsave (&ohci->lock, flags);
477 if (!HCD_HW_ACCESSIBLE(hcd))
478 goto done;
479
480 /* undocumented erratum seen on at least rev D */
481 if ((ohci->flags & OHCI_QUIRK_AMD756)
482 && (roothub_a (hc: ohci) & RH_A_NDP) > MAX_ROOT_PORTS) {
483 ohci_warn (ohci, "bogus NDP, rereads as NDP=%d\n",
484 ohci_readl (ohci, &ohci->regs->roothub.a) & RH_A_NDP);
485 /* retry later; "should not happen" */
486 goto done;
487 }
488
489 /* init status */
490 if (roothub_status (hc: ohci) & (RH_HS_LPSC | RH_HS_OCIC))
491 buf [0] = changed = 1;
492 else
493 buf [0] = 0;
494 if (ohci->num_ports > 7) {
495 buf [1] = 0;
496 length++;
497 }
498
499 /* Clear the RHSC status flag before reading the port statuses */
500 ohci_writel(ohci, OHCI_INTR_RHSC, &ohci->regs->intrstatus);
501 rhsc_status = ohci_readl(ohci, &ohci->regs->intrstatus) &
502 OHCI_INTR_RHSC;
503
504 /* look at each port */
505 for (i = 0; i < ohci->num_ports; i++) {
506 u32 status = roothub_portstatus (hc: ohci, i);
507
508 /* can't autostop if ports are connected */
509 any_connected |= (status & RH_PS_CCS);
510
511 if (status & (RH_PS_CSC | RH_PS_PESC | RH_PS_PSSC
512 | RH_PS_OCIC | RH_PS_PRSC)) {
513 changed = 1;
514 if (i < 7)
515 buf [0] |= 1 << (i + 1);
516 else
517 buf [1] |= 1 << (i - 7);
518 }
519 }
520
521 if (ohci_root_hub_state_changes(ohci, changed,
522 any_connected, rhsc_status))
523 set_bit(HCD_FLAG_POLL_RH, addr: &hcd->flags);
524 else
525 clear_bit(HCD_FLAG_POLL_RH, addr: &hcd->flags);
526
527
528done:
529 spin_unlock_irqrestore (lock: &ohci->lock, flags);
530
531 return changed ? length : 0;
532}
533EXPORT_SYMBOL_GPL(ohci_hub_status_data);
534
535/*-------------------------------------------------------------------------*/
536
537static void
538ohci_hub_descriptor (
539 struct ohci_hcd *ohci,
540 struct usb_hub_descriptor *desc
541) {
542 u32 rh = roothub_a (hc: ohci);
543 u16 temp;
544
545 desc->bDescriptorType = USB_DT_HUB;
546 desc->bPwrOn2PwrGood = (rh & RH_A_POTPGT) >> 24;
547 desc->bHubContrCurrent = 0;
548
549 desc->bNbrPorts = ohci->num_ports;
550 temp = 1 + (ohci->num_ports / 8);
551 desc->bDescLength = 7 + 2 * temp;
552
553 temp = HUB_CHAR_COMMON_LPSM | HUB_CHAR_COMMON_OCPM;
554 if (rh & RH_A_NPS) /* no power switching? */
555 temp |= HUB_CHAR_NO_LPSM;
556 if (rh & RH_A_PSM) /* per-port power switching? */
557 temp |= HUB_CHAR_INDV_PORT_LPSM;
558 if (rh & RH_A_NOCP) /* no overcurrent reporting? */
559 temp |= HUB_CHAR_NO_OCPM;
560 else if (rh & RH_A_OCPM) /* per-port overcurrent reporting? */
561 temp |= HUB_CHAR_INDV_PORT_OCPM;
562 desc->wHubCharacteristics = cpu_to_le16(temp);
563
564 /* ports removable, and usb 1.0 legacy PortPwrCtrlMask */
565 rh = roothub_b (hc: ohci);
566 memset(s: desc->u.hs.DeviceRemovable, c: 0xff,
567 n: sizeof(desc->u.hs.DeviceRemovable));
568 desc->u.hs.DeviceRemovable[0] = rh & RH_B_DR;
569 if (ohci->num_ports > 7) {
570 desc->u.hs.DeviceRemovable[1] = (rh & RH_B_DR) >> 8;
571 desc->u.hs.DeviceRemovable[2] = 0xff;
572 } else
573 desc->u.hs.DeviceRemovable[1] = 0xff;
574}
575
576/*-------------------------------------------------------------------------*/
577
578#ifdef CONFIG_USB_OTG
579
580static int ohci_start_port_reset (struct usb_hcd *hcd, unsigned port)
581{
582 struct ohci_hcd *ohci = hcd_to_ohci (hcd);
583 u32 status;
584
585 if (!port)
586 return -EINVAL;
587 port--;
588
589 /* start port reset before HNP protocol times out */
590 status = ohci_readl(ohci, &ohci->regs->roothub.portstatus [port]);
591 if (!(status & RH_PS_CCS))
592 return -ENODEV;
593
594 /* hub_wq will finish the reset later */
595 ohci_writel(ohci, RH_PS_PRS, &ohci->regs->roothub.portstatus [port]);
596 return 0;
597}
598
599#else
600
601#define ohci_start_port_reset NULL
602
603#endif
604
605/*-------------------------------------------------------------------------*/
606
607
608/* See usb 7.1.7.5: root hubs must issue at least 50 msec reset signaling,
609 * not necessarily continuous ... to guard against resume signaling.
610 */
611#define PORT_RESET_MSEC 50
612
613/* this timer value might be vendor-specific ... */
614#define PORT_RESET_HW_MSEC 10
615
616/* wrap-aware logic morphed from <linux/jiffies.h> */
617#define tick_before(t1,t2) ((s16)(((s16)(t1))-((s16)(t2))) < 0)
618
619/* called from some task, normally hub_wq */
620static inline int root_port_reset (struct ohci_hcd *ohci, unsigned port)
621{
622 __hc32 __iomem *portstat = &ohci->regs->roothub.portstatus [port];
623 u32 temp = 0;
624 u16 now = ohci_readl(ohci, &ohci->regs->fmnumber);
625 u16 reset_done = now + PORT_RESET_MSEC;
626 int limit_1 = DIV_ROUND_UP(PORT_RESET_MSEC, PORT_RESET_HW_MSEC);
627
628 /* build a "continuous enough" reset signal, with up to
629 * 3msec gap between pulses. scheduler HZ==100 must work;
630 * this might need to be deadline-scheduled.
631 */
632 do {
633 int limit_2;
634
635 /* spin until any current reset finishes */
636 limit_2 = PORT_RESET_HW_MSEC * 2;
637 while (--limit_2 >= 0) {
638 temp = ohci_readl (ohci, portstat);
639 /* handle e.g. CardBus eject */
640 if (temp == ~(u32)0)
641 return -ESHUTDOWN;
642 if (!(temp & RH_PS_PRS))
643 break;
644 udelay (usec: 500);
645 }
646
647 /* timeout (a hardware error) has been observed when
648 * EHCI sets CF while this driver is resetting a port;
649 * presumably other disconnect paths might do it too.
650 */
651 if (limit_2 < 0) {
652 ohci_dbg(ohci,
653 "port[%d] reset timeout, stat %08x\n",
654 port, temp);
655 break;
656 }
657
658 if (!(temp & RH_PS_CCS))
659 break;
660 if (temp & RH_PS_PRSC)
661 ohci_writel (ohci, RH_PS_PRSC, portstat);
662
663 /* start the next reset, sleep till it's probably done */
664 ohci_writel (ohci, RH_PS_PRS, portstat);
665 msleep(PORT_RESET_HW_MSEC);
666 now = ohci_readl(ohci, &ohci->regs->fmnumber);
667 } while (tick_before(now, reset_done) && --limit_1 >= 0);
668
669 /* caller synchronizes using PRSC ... and handles PRS
670 * still being set when this returns.
671 */
672
673 return 0;
674}
675
676int ohci_hub_control(
677 struct usb_hcd *hcd,
678 u16 typeReq,
679 u16 wValue,
680 u16 wIndex,
681 char *buf,
682 u16 wLength
683) {
684 struct ohci_hcd *ohci = hcd_to_ohci (hcd);
685 int ports = ohci->num_ports;
686 u32 temp;
687 int retval = 0;
688
689 if (unlikely(!HCD_HW_ACCESSIBLE(hcd)))
690 return -ESHUTDOWN;
691
692 switch (typeReq) {
693 case ClearHubFeature:
694 switch (wValue) {
695 case C_HUB_OVER_CURRENT:
696 ohci_writel (ohci, RH_HS_OCIC,
697 &ohci->regs->roothub.status);
698 break;
699 case C_HUB_LOCAL_POWER:
700 break;
701 default:
702 goto error;
703 }
704 break;
705 case ClearPortFeature:
706 if (!wIndex || wIndex > ports)
707 goto error;
708 wIndex--;
709
710 switch (wValue) {
711 case USB_PORT_FEAT_ENABLE:
712 temp = RH_PS_CCS;
713 break;
714 case USB_PORT_FEAT_C_ENABLE:
715 temp = RH_PS_PESC;
716 break;
717 case USB_PORT_FEAT_SUSPEND:
718 temp = RH_PS_POCI;
719 break;
720 case USB_PORT_FEAT_C_SUSPEND:
721 temp = RH_PS_PSSC;
722 break;
723 case USB_PORT_FEAT_POWER:
724 temp = RH_PS_LSDA;
725 break;
726 case USB_PORT_FEAT_C_CONNECTION:
727 temp = RH_PS_CSC;
728 break;
729 case USB_PORT_FEAT_C_OVER_CURRENT:
730 temp = RH_PS_OCIC;
731 break;
732 case USB_PORT_FEAT_C_RESET:
733 temp = RH_PS_PRSC;
734 break;
735 default:
736 goto error;
737 }
738 ohci_writel (ohci, temp,
739 &ohci->regs->roothub.portstatus [wIndex]);
740 // ohci_readl (ohci, &ohci->regs->roothub.portstatus [wIndex]);
741 break;
742 case GetHubDescriptor:
743 ohci_hub_descriptor (ohci, desc: (struct usb_hub_descriptor *) buf);
744 break;
745 case GetHubStatus:
746 temp = roothub_status (hc: ohci) & ~(RH_HS_CRWE | RH_HS_DRWE);
747 put_unaligned_le32(val: temp, p: buf);
748 break;
749 case GetPortStatus:
750 if (!wIndex || wIndex > ports)
751 goto error;
752 wIndex--;
753 temp = roothub_portstatus (hc: ohci, i: wIndex);
754 put_unaligned_le32(val: temp, p: buf);
755
756 if (*(u16*)(buf+2)) /* only if wPortChange is interesting */
757 dbg_port(ohci, "GetStatus", wIndex, temp);
758 break;
759 case SetHubFeature:
760 switch (wValue) {
761 case C_HUB_OVER_CURRENT:
762 // FIXME: this can be cleared, yes?
763 case C_HUB_LOCAL_POWER:
764 break;
765 default:
766 goto error;
767 }
768 break;
769 case SetPortFeature:
770 if (!wIndex || wIndex > ports)
771 goto error;
772 wIndex--;
773 switch (wValue) {
774 case USB_PORT_FEAT_SUSPEND:
775#ifdef CONFIG_USB_OTG
776 if (hcd->self.otg_port == (wIndex + 1)
777 && hcd->self.b_hnp_enable)
778 ohci->start_hnp(ohci);
779 else
780#endif
781 ohci_writel (ohci, RH_PS_PSS,
782 &ohci->regs->roothub.portstatus [wIndex]);
783 break;
784 case USB_PORT_FEAT_POWER:
785 ohci_writel (ohci, RH_PS_PPS,
786 &ohci->regs->roothub.portstatus [wIndex]);
787 break;
788 case USB_PORT_FEAT_RESET:
789 retval = root_port_reset (ohci, port: wIndex);
790 break;
791 default:
792 goto error;
793 }
794 break;
795
796 default:
797error:
798 /* "protocol stall" on error */
799 retval = -EPIPE;
800 }
801 return retval;
802}
803EXPORT_SYMBOL_GPL(ohci_hub_control);
804